Christopher D. Clausen wrote:
Dean Knape <[EMAIL PROTECTED]> wrote:
I have a sysprep'd W2K3 R2 server VM with OpenAFS 1.5.26. I've added
the necessary GuiRunOnce entry in the sysprep.inf using the
instloop.exe extracted from this version's MSI to have the loopback
adapter reinstalled.
Instloop does reinstall the loopback adapter but I end up with my
previously DHCP enabled local area connection getting a static 10.
... address and my AFS adapter doing DHCP.
I too have seen this happen. Usually happens only when there are
multiple NICs in a machine, either real ethernet ones or FireWire. But
since you are using a VM, I bet you do not have firewire.
Try this:
Before running sysprep on the image, disable the network adapter at the
VM level.
Shutdown the AFS service.
start -> run -> cmd
set DEVMGR_SHOW_DETAILS=1
set DEVMGR_SHOW_NONPRESENT_DEVICES=1
%SYSTEMROOT%\system32\devmgmt.msc
View -> Show hidden devices
then find and delete all NICs, including the loopback adapter
This should remove pre-configured network adapters from your syspreped
image. Hopefully this will allow newly detected ones to be correctly
setup and the loopback adapter install to work as desired.
<<CDC
That did the trick. There were a number of interfaces I wasn't able to
remove but by stopping the service and removing my primary and loopback
adapters instloop was able to add the loopback successfully.
Thanks,
dean
_______________________________________________
OpenAFS-info mailing list
[email protected]
https://lists.openafs.org/mailman/listinfo/openafs-info
