Dean Knape <[EMAIL PROTECTED]> wrote: > I have a sysprep'd W2K3 R2 server VM with OpenAFS 1.5.26. I've added > the necessary GuiRunOnce entry in the sysprep.inf using the > instloop.exe extracted from this version's MSI to have the loopback > adapter reinstalled. > > Instloop does reinstall the loopback adapter but I end up with my > previously DHCP enabled local area connection getting a static 10. > ... address and my AFS adapter doing DHCP.
I too have seen this happen. Usually happens only when there are multiple NICs in a machine, either real ethernet ones or FireWire. But since you are using a VM, I bet you do not have firewire. Try this: Before running sysprep on the image, disable the network adapter at the VM level. Shutdown the AFS service. start -> run -> cmd set DEVMGR_SHOW_DETAILS=1 set DEVMGR_SHOW_NONPRESENT_DEVICES=1 %SYSTEMROOT%\system32\devmgmt.msc View -> Show hidden devices then find and delete all NICs, including the loopback adapter This should remove pre-configured network adapters from your syspreped image. Hopefully this will allow newly detected ones to be correctly setup and the loopback adapter install to work as desired. <<CDC _______________________________________________ OpenAFS-info mailing list [email protected] https://lists.openafs.org/mailman/listinfo/openafs-info
