> tried:
> sudo /opt/openbd/sys/change_user.sh start
This isn't the control script. ;)
Try this instead:
/opt/openbd/openbd_ctl restart
Also, if the "change_user.sh" script isn't present, you're probably
using the 1.2 installer. Try the 1.3 installer instead:
http://openbd.viviotech.net/
Alan will get the 1.3 installers linked up to the main site instead of
the 1.2 installers as soon as he has time.
Hope this helps!
Warm regards,
Jordan Michaels
Vivio Technologies
http://www.viviotech.net/
Open BlueDragon Steering Committee
Railo Community Distributions
On 06/13/2010 02:46 AM, nUboon2Age wrote:
I tried running the installer again but no change. I also ran
installer AFTER changing the permissions for root in /etc/init.d/ from
being not set to being read/write. Again no change.
Also I tried to start OBD with the directions from:
http://wiki.openbluedragon.org/wiki/index.php/Getting_Started_%28OBD_Installer%29
tried:
sudo /opt/openbd/sys/change_user.sh start
but that directory doesn't contain a script by that name.
More clues needed... ;-)
nUboon2Age
--
Open BlueDragon Public Mailing List
http://www.openbluedragon.org/ http://twitter.com/OpenBlueDragon
online manual: http://www.openbluedragon.org/manual/
mailing list - http://groups.google.com/group/openbd?hl=en
