First suggestion would be to try the 1.3 installer, available here: http://openbd.viviotech.net/
It's got built-in support for IIS6 on W2K3. If possible, I'd recommend it on a fresh install so that no previous configs interfere with installers auto-configs. IIS6 with ISAPI support is all that needs to be installed - the rest is optional. > Under IIS I have only one website defined (the above URL; I'll refer > to it as WD2 for the remainder of this post). The only non-standard > thing about my setup is that I keep WD2 at "C:\_webproduction > \WD2\htdocs\" -- not in the standard IIS directory "C:\Inetpub\" It shouldn't matter where your site files are located. You can set them to be located wherever you want. > The "C:\_webproduction" directory has permissions for EVERYONE > Read > & Execute privileges for now The standard permissions of the IUSER account having read access here should be all that's needed for static content. > What happens is that when I call "http://www2.welcomedriver.com/ > index.cfm" from any web browser, the DefaultAppPool immediately > crashes because of rapid-fail protection. This is highly unusual and suggests a configuration problem - maybe a loop of some kind - or a bug in the connector (it's been known to happen on occasion). Definitely try the 1.3 installer and see if you have better luck with that. Warm regards, Jordan Michaels Vivio Technologies -- Open BlueDragon Public Mailing List http://www.openbluedragon.org/ http://twitter.com/OpenBlueDragon online manual: http://www.openbluedragon.org/manual/ mailing list - http://groups.google.com/group/openbd?hl=en
