Your node for smtpserver has both the IP and port.
Is that how your real setup is configured too?
If so, remove the :25 from <smtpserver>
That's already specified in <smtpport>
Then try again.
Alan Holden
(at work)
On 3/28/2012 10:42 AM, Alan Cole wrote:
Alan,
Sorry for the late delay on the follow up to this. I really appreciate
all the input that has been given.
Prior to my posting the initial request here ... I have tried all the following
(I apologize if i did not communicate this clearly the first post):
1. When I verify the mail server in the BD admin console the error message is
displayed as:
"Mail server verification failed: 501 5.0.0 HELO requires domain
address"
1A - mail will not send from an application using CFMAIL
2. I can telnet to the mail server from the Open BD server
2A - I can issue a HELO with IP address - good response
2B - I can issue a HELO with hostname (as returned by hostname cmd) -
good response
2C - I can issue a HELO with the FQDN - good response
2D - I can issue a HELO with 'localhost' - good response
2E - I can issue a HELO *without* any parameters - BAD response **Same
error msg that the BD admin console gives me
Based on my testing described in 2 above, I am under the belief that the
BD server does not include the hostname in the HELO command. I know this
cannot be true for majority of folks so I am trying to determine what BD would
submit as "hostname" and if there is some configuration I have missed/or
performed
incorrectly.
Further info - the mail server is my mail server. It is on a different network
segment
but all other ACF servers on the same network segment as the OpenBD server
can verify and send mail. The mail server is setup to relay from my development
network segment, and again, does so properly for the other Adobe CF servers
located
there.
Matt had asked for the bluedragon.xml particulars of the mail conf... first I
found
my bluedragon.xml in the following directory: /opt/openbd/conf/ and NOT in
WEB-INF/ as indicated in his email.
<cfmail>
<usetls>false</usetls>
<interval>240</interval>
<charset>UTF-8</charset>
<domain>dev4.ddmg.net</domain>
<smtpport>25</smtpport>
<smtpserver>1.2.3.4:25</smtpserver> <!--- false IP for posting --->
<timeout>60</timeout>
<usessl>false</usessl>
<threads>1</threads>
<catchemail></catchemail>
</cfmail>
Any help is greatly appreciated and if you need further information please
let me know.
Thanks,
Alan Cole
(PGP Key ID: 0x82D8E0C7)
--
online documentation: http://openbd.org/manual/
google+ hints/tips: https://plus.google.com/115990347459711259462
http://groups.google.com/group/openbd?hl=en
