As tested, we had confirmed that the updated version of osmo-sip-connector has
an issue regarding the Ring Back Tone.
The version that we had confirmed with Ring Back Tone is the
Updated version that has no Ring Back Tone is
Thanks for the support!
On Aug 2, 2017, at 1:37 AM, Ron
This sender failed our fraud detection checks and may not be who they appear to
be. Learn about spoofing<http://aka.ms/LearnAboutSpoofing>
We'll check on this and will share the results.
Sent from my Huawei Mobile
-------- Original Message --------
Subject: Re: Ring Back Tone Missing during Call Setup
From: Holger Freyther
> On 27. Jul 2017, at 18:30, Ron
> <ron.me...@entropysolution.com<mailto:ron.me...@entropysolution.com>> wrote:
> Hi All,
> I’m not sure if this is a valid question but still I’m going to try.
> I just updated from my old version of OSMOCOM to the latest one.
> Upon trying to test the updated version, it seems that the ring back tone,
> the one that rings in the Caller (Anum/Mobile Originating) side if the call
> started to ring on the Callee (BNUM/Mobile Terminating) side, is missing.
> Can anyone direct me to the right path where to check it?
Check if this is in your checkout and being called during the call. Check
what happens if you revert it. Check the diff of the MNCC log.. send a patch.