http://www.telecomsource.net/showthread.php?293-What-is-the-diffrerence-between-FULL-and-SUB-values
Ah.. internet... 😛 On February 12, 2019 11:17:40 AM UTC, Gullik Webjorn <[email protected]> wrote: >Hi, > >I cannot find a description of this command in the manual. This is very > >useful to debug >ms, antennas and radio. > >OsmoBSC> show conn >Active subscriber connections: >conn ID=232, MSC=0, hodec2_fail=0, mgw_ep=rtpbridge/1@mgw >BTS 1, TRX 0, Timeslot 1, Lchan 0: Type TCH_F >  Connection: 1, State: ESTABLISHED >  BS Power: 0 dBm, MS Power: 10 dBm >  Channel Mode / Codec: SPEECH_V1 >  No Subscriber >  Bound IP: 192.168.1.75 Port 16404 RTP_TYPE2=0 CONN_ID=0 >  Conn. IP: 192.168.1.70 Port 4084 RTP_TYPE=3 SPEECH_MODE=0x00 >  Measurement Report: >    Flags: >    MS Timing Offset: 0 >    L1 MS Power: 10 dBm, Timing Advance: 4 >    RXL-FULL-dl: -73 dBm, RXL-SUB-dl: -73 dBm RXQ-FULL-dl: 0, >RXQ-SUB-dl: 0 >    RXL-FULL-ul: -57 dBm, RXL-SUB-ul: -58 dBm RXQ-FULL-ul: 0, >RXQ-SUB-ul: 0 > >I guess "dl" means downlink, from BTS to MS, and "ul" means uplink, MS >to BTS. > >But, what is the difference between FULL and SUB ? What does the two >rightmost items mean, >those which are 0 in the above? What does the "No Subscriber" mean, >should that be IMSI ? > >Still on the subject of LimeSDR Mini, now debugging radio and antenna >arrangements. > >Regards, >Gullik
