Hi Ed

The change that triggers the panic has been backed out.  I think it's
already available on ftp.openbsd.org, or you can build a new kernel from
source.

Sorry for the inconvience!


On 2015 Dec 23 (Wed) at 21:25:21 -0500 (-0500), Ed  D. wrote:
:
:I realize this info is not of much use, but it's
:the best I'm able to do with what level of knowledge
:I have.
:
:My firewall/router repeatedly started locking up hard
:since installing OpenBSD 5.9 beta version 12/23/15 10:45 today.
:
:This happens on my firewall/router that up until
:today was reliable and never crashed.
:
:There's no pattern to when this occurs, other than the firewall
:just locks up hard at the ddb> prompt 
:with the following panic message within 30 minutes or less after
:booting up.
:
:The message is always the same except for TID, PID and CPU.
:
:There are no packages installed on this system. 
:
:I tried enabling sysctl ddb.console=1, but it gives me an
:error message that I'm not allowed to do it.
:
:I'm sorry, but this is the best info I can provide.
:
:Any help would be appreciated.   Thanks
:
:
:panic: kernel diagnostic assertion "!pf_state_key_isvalid(sk)" failed: 
:file "../../../../net/pf.c", line 6830
:Stopped at    Debugger+0x9:   leave
:  TID    PID   UID   PRFLAGS  CPU  COMMAND
:*26788  26788    0   0x14000    2  softnet
:Debugger() at Debugger+0x9
:panic() at panic+0xfe
:__assert() at __assert+0x25
:pf_state_key_unref() at pf_state_key_unref+0x88
:pf_pkt_unlink_state_key() at pf_pkt_unlink_state_key+0x15
:m_free() at m_free+0xa0
:m_free() at m_free+0x15
:icmp_do_error() at icmp_do_error+0x29f
:icmp_error() at icmp_error+0xe
:ip_forward() at ip_forward+0x238
:ipv4_input() at ipv4_input+0x309
:ipintr() at ipintr+0x1e
:netintr() at netintr+0x79
:softintr_dispatch() at softintr_dispatch+0x8b
:end trace frame: 0xffff800022285e40, count: 0
:
:
:# cat /var/run/dmesg.boot
:OpenBSD 5.9-beta (GENERIC.MP) #1774: Wed Dec 23 09:56:43 MST 2015
:    
:dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
:real mem = 4009164800 (3823MB)
:avail mem = 3883528192 (3703MB)
:mpath0 at root
:scsibus0 at mpath0: 256 targets
:mainbus0 at root
:bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f000 (64 entries)
:bios0: vendor American Megatrends Inc. version "0902" date 12/10/2010
:bios0: ASUSTeK Computer INC. M4A88TD-M/USB3
:acpi0 at bios0: rev 2
:acpi0: sleep states S0 S1 S3 S4 S5
:acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT
:acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE5(S4) PCE6(S4) PCE7(S4) 
:PCE9(S4) PCEA(S4) RLAN(S4) SBAZ(S4) P0PC(S4) GEC_(S4) UHC1(S4) UHC2(S4) 
:USB3(S4) UHC4(S4) USB5(S4) [...]
:acpitimer0 at acpi0: 3579545 Hz, 32 bits
:acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
:cpu0 at mainbus0: apid 0 (boot processor)
:cpu0: AMD Phenom(tm) II X6 1090T Processor, 3214.70 MHz
:cpu0: 
:FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
:CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1
:GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOW
:P,OSVW,IBS,SKINIT,ITSC
:cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 
:64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache
:cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully 
:associative
:cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully 
:associative
:cpu0: AMD erratum 721 detected and fixed
:cpu0: smt 0, core 0, package 0
:mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
:cpu0: apic clock running at 200MHz
:cpu0: mwait min=64, max=64, IBE
:cpu1 at mainbus0: apid 1 (application processor)
:cpu1: AMD Phenom(tm) II X6 1090T Processor, 3214.33 MHz
:cpu1: 
:FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
:CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1
:GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOW
:P,OSVW,IBS,SKINIT,ITSC
:cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 
:64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache
:cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully 
:associative
:cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully 
:associative
:cpu1: AMD erratum 721 detected and fixed
:cpu1: smt 0, core 1, package 0
:cpu2 at mainbus0: apid 2 (application processor)
:cpu2: AMD Phenom(tm) II X6 1090T Processor, 3214.33 MHz
:cpu2: 
:FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
:CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1
:GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOW
:P,OSVW,IBS,SKINIT,ITSC
:cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 
:64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache
:cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully 
:associative
:cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully 
:associative
:cpu2: AMD erratum 721 detected and fixed
:cpu2: smt 0, core 2, package 0
:cpu3 at mainbus0: apid 3 (application processor)
:cpu3: AMD Phenom(tm) II X6 1090T Processor, 3214.33 MHz
:cpu3: 
:FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
:CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1
:GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOW
:P,OSVW,IBS,SKINIT,ITSC
:cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 
:64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache
:cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully 
:associative
:cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully 
:associative
:cpu3: AMD erratum 721 detected and fixed
:cpu3: smt 0, core 3, package 0
:cpu4 at mainbus0: apid 4 (application processor)
:cpu4: AMD Phenom(tm) II X6 1090T Processor, 3214.33 MHz
:cpu4: 
:FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
:CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1
:GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOW
:P,OSVW,IBS,SKINIT,ITSC
:cpu4: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 
:64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache
:cpu4: ITLB 32 4KB entries fully associative, 16 4MB entries fully 
:associative
:cpu4: DTLB 48 4KB entries fully associative, 48 4MB entries fully 
:associative
:cpu4: AMD erratum 721 detected and fixed
:cpu4: smt 0, core 4, package 0
:cpu5 at mainbus0: apid 5 (application processor)
:cpu5: AMD Phenom(tm) II X6 1090T Processor, 3214.33 MHz
:cpu5: 
:FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
:CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1
:GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOW
:P,OSVW,IBS,SKINIT,ITSC
:cpu5: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 
:64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache
:cpu5: ITLB 32 4KB entries fully associative, 16 4MB entries fully 
:associative
:cpu5: DTLB 48 4KB entries fully associative, 48 4MB entries fully 
:associative
:cpu5: AMD erratum 721 detected and fixed
:cpu5: smt 0, core 5, package 0
:ioapic0 at mainbus0: apid 6 pa 0xfec00000, version 21, 24 pins
:acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
:acpihpet0 at acpi0: 14318180 Hz
:acpiprt0 at acpi0: bus 0 (PCI0)
:acpiprt1 at acpi0: bus 1 (P0P1)
:acpiprt2 at acpi0: bus 2 (PCE2)
:acpiprt3 at acpi0: bus -1 (PCE3)
:acpiprt4 at acpi0: bus 3 (PCE5)
:acpiprt5 at acpi0: bus -1 (PCE6)
:acpiprt6 at acpi0: bus 4 (PCE7)
:acpiprt7 at acpi0: bus 5 (PCE9)
:acpiprt8 at acpi0: bus -1 (PCEA)
:acpiprt9 at acpi0: bus 6 (P0PC)
:acpiec0 at acpi0
:acpicpu0 at acpi0: !C2(1@75 io@0x814), C1(@1 halt!), PSS
:acpicpu1 at acpi0: !C2(1@75 io@0x814), C1(@1 halt!), PSS
:acpicpu2 at acpi0: !C2(1@75 io@0x814), C1(@1 halt!), PSS
:acpicpu3 at acpi0: !C2(1@75 io@0x814), C1(@1 halt!), PSS
:acpicpu4 at acpi0: !C2(1@75 io@0x814), C1(@1 halt!), PSS
:acpicpu5 at acpi0: !C2(1@75 io@0x814), C1(@1 halt!), PSS
:aibs0 at acpi0 RTMP RVLT RFAN GGRP GITM SITM
:acpibtn0 at acpi0: PWRB
:cpu0: 3214 MHz: speeds: 3200 2400 1600 800 MHz
:pci0 at mainbus0 bus 0
:pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
:ppb0 at pci0 dev 1 function 0 vendor "Asustek", unknown product 0x9602 
:rev 0x00
:pci1 at ppb0 bus 1
:radeondrm0 at pci1 dev 5 function 0 "ATI Radeon HD 4250" rev 0x00
:drm0 at radeondrm0
:radeondrm0: apic 6 int 18
:azalia0 at pci1 dev 5 function 1 "ATI Radeon HD 4200 HD Audio" rev 
:0x00: msi
:azalia0: no supported codecs
:ppb1 at pci0 dev 2 function 0 "AMD RS780 PCIE" rev 0x00: msi
:pci2 at ppb1 bus 2
:em0 at pci2 dev 0 function 0 "Intel I350" rev 0x01: msi, address 
:a0:36:9f:3a:d0:e8
:em1 at pci2 dev 0 function 1 "Intel I350" rev 0x01: msi, address 
:a0:36:9f:3a:d0:e9
:ppb2 at pci0 dev 5 function 0 "AMD RS780 PCIE" rev 0x00: msi
:pci3 at ppb2 bus 3
:em2 at pci3 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 
:00:1b:21:98:51:85
:ppb3 at pci0 dev 7 function 0 "AMD RS780 PCIE" rev 0x00: msi
:pci4 at ppb3 bus 4
:xhci0 at pci4 dev 0 function 0 "NEC xHCI" rev 0x03: msi
:usb0 at xhci0: USB revision 3.0
:uhub0 at usb0 "NEC xHCI root hub" rev 3.00/1.00 addr 1
:ppb4 at pci0 dev 9 function 0 "AMD RS780 PCIE" rev 0x00: msi
:pci5 at ppb4 bus 5
:pciide0 at pci5 dev 0 function 0 "VIA VT6415 IDE" rev 0x00: ATA133, 
:channel 0 wired to native-PCI, channel 1 wired to native-PCI
:pciide0: using apic 6 int 17 for native-PCI interrupt
:wd0 at pciide0 channel 0 drive 1: <ST3250620A>
:wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
:wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
:pciide0: channel 1 disabled (no drives)
:ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 6 int 
:19, AHCI 1.2
:ahci0: port 0: 1.5Gb/s
:ahci0: port 1: 1.5Gb/s
:scsibus1 at ahci0: 32 targets
:cd0 at scsibus1 targ 0 lun 0: <PIONEER, DVD-RW DVR-218L, 1.02> ATAPI 
:5/cdrom removable
:sd0 at scsibus1 targ 1 lun 0: <ATA, WDC WD740GD-00FL, 27.0> SCSI3 
:0/direct fixed t10.ATA_WDC_WD740GD-00FLA1_WD-WMAKE1665365_
:sd0: 70911MB, 512 bytes/sector, 145226112 sectors
:ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 6 int 
:18, version 1.0, legacy support
:ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 6 int 
:17
:usb1 at ehci0: USB revision 2.0
:uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
:ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 6 int 
:18, version 1.0, legacy support
:ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 6 int 
:17
:usb2 at ehci1: USB revision 2.0
:uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
:piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
:iic0 at piixpm0
:spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600
:spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
:pciide1 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, 
:channel 0 configured to compatibility, channel 1 configured to 
:compatibility
:pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
:ppb5 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
:pci6 at ppb5 bus 6
:ral0 at pci6 dev 5 function 0 "Ralink RT2860" rev 0x00: apic 6 int 20, 
:address 00:25:9c:e5:68:a2
:ral0: MAC/BBP RT2860 (rev 0x0103), RF RT2850 (MIMO 2T2R)
:ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 6 int 
:18, version 1.0, legacy support
:ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 6 int 
:18, version 1.0, legacy support
:ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 6 int 
:17
:usb3 at ehci2: USB revision 2.0
:uhub3 at usb3 "ATI EHCI root hub" rev 2.00/1.00 addr 1
:pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
:pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
:pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
:km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
:pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
:usb4 at ohci0: USB revision 1.0
:uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
:usb5 at ohci1: USB revision 1.0
:uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
:isa0 at pcib0
:isadma0 at isa0
:com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
:pckbc0 at isa0 port 0x60/5 irq 1 irq 12
:pckbd0 at pckbc0 (kbd slot)
:wskbd0 at pckbd0: console keyboard
:pcppi0 at isa0 port 0x61
:spkr0 at pcppi0
:lpt0 at isa0 port 0x378/4 irq 7
:it0 at isa0 port 0x2e/2: IT8721F rev 3, EC port 0x290
:usb6 at ohci2: USB revision 1.0
:uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
:usb7 at ohci3: USB revision 1.0
:uhub7 at usb7 "ATI OHCI root hub" rev 1.00/1.00 addr 1
:umass0 at uhub1 port 4 configuration 1 interface 0 "Kingston 
:DataTraveler G3" 
:rev 2.00/1.00 addr 2
:umass0: using SCSI over Bulk-Only
:scsibus2 at umass0: 2 targets, initiator 0
:sd1 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler G3, PMAP> SCSI0 
:0/direct 
:removable serial.09306545EAC1351A022A
:sd1: 14762MB, 512 bytes/sector, 30233472 sectors
:uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech USB 
:Keyboard" rev 
:1.10/64.00 addr 2
:uhidev0: iclass 3/1
:ukbd0 at uhidev0: 8 variable keys, 6 key codes
:wskbd1 at ukbd0 mux 1
:uhidev1 at uhub5 port 1 configuration 1 interface 1 "Logitech USB 
:Keyboard" rev 
:1.10/64.00 addr 2
:uhidev1: iclass 3/0, 3 report ids
:uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
:uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
:uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
:vscsi0 at root
:scsibus3 at vscsi0: 256 targets
:softraid0 at root
:scsibus4 at softraid0: 256 targets
:root on sd0a (255ae8afb2eb3eb4.a) swap on sd0b dump on sd0b
:WARNING: / was not properly unmounted
:r600_cp: Failed to load firmware "radeon-rs780_pfp"
:error: [drm:pid0:r600_startup] *ERROR* Failed to load firmware!
:drm:pid0:r600_init *ERROR* disabling GPU acceleration
:drm:pid0:radeon_bo_unpin *WARNING* 0xffff8000002bc2c0 unpin not 
:necessary
:drm:pid0:radeon_bo_unpin *WARNING* 0xffff8000002bc2c0 unpin not 
:necessary
:radeondrm0: 1024x768
:wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using 
:wskbd0
:wskbd1: connecting to wsdisplay0
:wsdisplay0: screen 1-5 added (std, vt100 emulation)
:#
:_______________________________________________
:Openbsd-newbies mailing list
:Openbsd-newbies@sfobug.theapt.org
:http://mailman.theapt.org/listinfo/openbsd-newbies

-- 
H. L. Mencken suffers from the hallucination that he is H. L.
Mencken -- there is no cure for a disease of that magnitude.
                -- Maxwell Bodenheim
_______________________________________________
Openbsd-newbies mailing list
Openbsd-newbies@sfobug.theapt.org
http://mailman.theapt.org/listinfo/openbsd-newbies

Reply via email to