while playing around with scep an a Cisco 836 I experienced, that certificate request does not appear in "Certificate requests" menu of OpenCA.
After configuration of crypto pki trustpoint 836 requested the ca certificate. It was delivered by OpenCA and 836 installed it. After that 836 requested a certificate:
% Start certificate enrollment ..
% The fully-qualified domain name in the certificate will be: t-dsl.cf.cfvpn
% The subject name in the certificate will be: t-dsl.cf.cfvpn
% The serial number in the certificate will be: 53233907
% The IP address in the certificate is 192.168.0.244
% Certificate request sent to Certificate Authority
% The certificate request fingerprint will be displayed.
% The 'show crypto pki certificate' command will also show the fingerprint.
Apr 25 16:19:02.529: CRYPTO_PKI: Fingerprint: 7F66FDA0 BBEE46E9 3AC163FA 9DE29996
As far as I understood OpenCAs docs, a request should be sent after that. CA admin should approve that request and 836 should get a certificate.
If I do a manual request with pub module of OpenCA everything is running as I expect.
Is there a way to get more debug output from scep ?
regards
Christian
------------------------------------------------------- This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek For a limited time only, get FREE Ground shipping on all orders of $35 or more. Hurry up and shop folks, this offer expires April 30th! http://www.thinkgeek.com/freeshipping/?cpg=12297 _______________________________________________ Openca-Users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/openca-users
