Leon, On Tue, 2004-04-27 at 08:50, lin leon wrote: > hi everybody: > I've done to the step : Export Configuration from CA > ---------------------------- > Put in a freshly formatted floppy, > make shure that wwwrun has access to /dev/fd0 (chown wwwrun /dev/fd0). > Open within the browser > http://ca.intern.results-hannover.de/ca_node > -> Dataexchange -> Enroll data to a lower level of the hierarchy -> > Configuration > ------------------------------ > but when i finished the work above,i found nothing in the floppy.and the > floppy drive and disk are both ok. > anyone has idea,please help me > thank you
Are you sure that you have your export routine pointing to the floppy device ? Have a look in the config file. Are there any errors on the screen when you do the export ? The screen tells you where it has written the export file, does it say /dev/fd0/exchange.tar (or whatever you have called it) ? Chris... ------------------------------------------------------- This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek For a limited time only, get FREE Ground shipping on all orders of $35 or more. Hurry up and shop folks, this offer expires April 30th! http://www.thinkgeek.com/freeshipping/?cpg=12297 _______________________________________________ Openca-Users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/openca-users
