I have installed fresh Fedora 9 andI am getting this error now:
# rpmbuild -ba openca-tools.spec
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.94608
+ umask 022
+ cd /usr/src/redhat/BUILD
+ LANG=C
+ export LANG
+ unset DISPLAY
+ $'\r'
: command not found608: line 27:
error: Bad exit status from /var/tmp/rpm-tmp.94608 (%prep)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.94608 (%prep)
Regards,
Anil Aliyan
----- Original Message -----
From: "Helmut Manck" <[EMAIL PROTECTED]>
To: "Users' Help and Suggestions" <openca-users@lists.sourceforge.net>
Sent: Monday, December 01, 2008 2:46 PM
Subject: Re: [Openca-Users] Updated Spec-Files
> Hi,
>
> just had a look, 1.0.1 is not mentioned within the spec file, but 1.1.0
> (as supposed to).
> Put your files in that locations:
>
> /usr/src/redhat/SOURCES/openca-base-1.0.2.tar.gz
> /usr/src/redhat/SOURCES/openca-tools-1.1.0.tar.gz
> /usr/src/redhat/SPECS/OpenCA.spec
> /usr/src/redhat/SPECS/openca-tools.spec
>
> rebuild with:
> rpmbuild -ba /usr/src/redhat/SPECS/openca-tools.spec
>
> install openca-tools.
>
> rebuild with:
> rpmbuild -ba /usr/src/redhat/SPECS/OpenCA.spec
>
> What did you do before?
>
> Regards, Helmut
>
>
> Anil Aliyan wrote:
>> The openca-tools spec files does'nt work. It asks for
>> openca-tools-1.0.1.tar.gz as base for building. I search for
>> openca-tools-1.0.1.tar.gz but i found it no where on any source wbsite.
>> openca-tools-1.0.0 is avilable but that is of no use.
>>
>> If you have openca-tools-1.0.1.tar.gz please send it to me.
>>
>> Regards,
>>
>> Anil Aliyan
>>
>> ----- Original Message -----
>> From: "Helmut Manck" <[EMAIL PROTECTED]>
>> To: <openca-users@lists.sourceforge.net>
>> Sent: Sunday, November 30, 2008 6:04 PM
>> Subject: [Openca-Users] Updated Spec-Files
>>
>>
>>
>>> Hi,
>>>
>>> the specfiles seem to be a bit outdated for openca 1.0.2 and
>>> openca-tools 1.1.0. Attached you will find adapted specfiles also
>>> containig distri detection for centos. They "workforme", I didn't check
>>> other distris, but they should work.
>>>
>>> Regards, Helmut
>>>
>>>
>>> --
>>> Dipl. Ing. Helmut Manck
>>> Senior Consultant
>>>
>>> eonas IT-Beratung und Entwicklung GmbH
>>> Greifenhagener Str. 54
>>> 10437 Berlin
>>> Germany
>>>
>>>
>>>
>>>
>>>
>>
>>
>> --------------------------------------------------------------------------------
>>
>>
>>
>>> # OpenCA RPM File
>>> # (c) 2006 by Massimiliano Pala and OpenCA Team
>>> # OpenCA Licensed Software
>>>
>>> %define __find_requires %{nil}
>>> %define debug_package %{nil}
>>>
>>> # %define _unpackaged_files_terminate_build 0
>>> # %define _missing_doc_files_terminate_build 0
>>>
>>> # Basic Definitions
>>> %define httpd_usr apache
>>> %define httpd_grp apache
>>> %define nobody nobody
>>> %define nogroup nobody
>>> %define openca_usr root
>>> %define openca_grp nobody
>>>
>>> %define is_mandrake %(test -e /etc/mandrake-release && echo 1 || echo 0)
>>> %define is_suse %(test -e /etc/SuSE-release && echo 1 || echo 0)
>>> %define is_fedora %(test -e /etc/fedora-release && echo 1 || echo 0)
>>> %define is_centos %(test -e /etc/redhat-release && grep -q CentOS
>>> /etc/redhat-release && echo 1 || echo 0)
>>>
>>> %define dist redhat
>>> %define disttag el
>>>
>>> %if %is_mandrake
>>> %define dist mandrake
>>> %define disttag mdk
>>> %endif
>>> %if %is_suse
>>> %define dist suse
>>> %define disttag suse
>>> %define nogroup nogroup
>>> %define httpd_usr wwwwrun
>>> %define httpd_grp nogroup
>>> %endif
>>> %if %is_fedora
>>> %define dist fedora
>>> %define disttag rhfc
>>> %endif
>>> %if %is_centos
>>> %define dist centos
>>> %define disttag el
>>> %endif
>>>
>>> %define distver %(release="`rpm -q --queryformat='%{VERSION}'
>>> %{dist}-release 2> /dev/null | tr . : | sed s/://g`" ; if test $? != 0 ;
>>> then release="" ; fi ; echo "$release")
>>> %define packer %(finger -lp `echo "$USER"` | head -n 1 | cut -d ' ' -f
>>> 2)
>>>
>>> %define ver 1.0.2
>>> %define RELEASE 1
>>> %define rel %{?CUSTOM_RELEASE}%{!?CUSTOM_RELEASE:%RELEASE}
>>> %define prefix /opt/openca
>>> %define mand /opt/openca/man
>>> %define sslprefix /usr
>>> %define openssl_req 0.9.7
>>> %define openldap_req 2.2
>>> %define openca_tools_req 1.1.0
>>> %define openca_common_req 0.9.3
>>>
>>> Summary: Open Source Certification Authority Software (PKI)
>>> Name: openca-base
>>> Version: %ver
>>> Release: %rel.%{disttag}%{distver}
>>> License: OpenCA License (BSD Style)
>>> Group: Security/PKI
>>> Source: openca-base-%{ver}.tar.gz
>>> Packager: %packer
>>> Vendor: OpenCA Labs
>>> BuildRoot: /var/tmp/openca-base-1.0.1
>>> URL: http://www.openca.org/
>>> Docdir: %{prefix}/doc
>>> Prefix: %{prefix}
>>> BuildRequires: openca-tools, httpd
>>>
>>> ## BuildRoot: %{_tmppath}/%{name}-%{ver}-%{rel}-buildroot
>>>
>>> %description
>>> The OpenCA package implements a full featured Certification Authority
>>> to issue and managed digital certificates.
>>>
>>> %define openca_prefix %{prefix}
>>> %define httpd_fs_prefix %{prefix}/var/www
>>> %define openssl_prefix /usr
>>>
>>> %package common
>>> Summary: Basic Components for OpenCA
>>> Group: Security/PKI
>>> AutoReq: no
>>> Requires: openssl >= %openssl_req, openca-tools >= %openca_tools_req,
>>> perl-XML-Parser
>>>
>>> %description common
>>>
>>> %package ca
>>> Summary: CA Components for OpenCA
>>> Group: Security/PKI
>>> Requires: openca-base-common >= %openca_common_req
>>>
>>> %description ca
>>>
>>> %package bp
>>> Summary: Batch Components for OpenCA
>>> Group: Security/PKI
>>> Requires: openca-base-common >= %openca_common_req
>>>
>>> %description bp
>>>
>>> %package ldap
>>> Summary: LDAP Components for OpenCA
>>> Group: Security/PKI
>>> Requires: openca-base-common >= %openca_common_req
>>>
>>> %description ldap
>>>
>>> %package pub
>>> Summary: Pub Components for OpenCA
>>> Group: Security/PKI
>>> Requires: openca-base-common >= %openca_common_req
>>>
>>> %description pub
>>>
>>> %package ra
>>> Summary: RA Components for OpenCA
>>> Group: Security/PKI
>>> Requires: openca-base-common >= %openca_common_req
>>>
>>> %description ra
>>>
>>> %package scep
>>> Summary: SCEP Components for OpenCA
>>> Group: Security/PKI
>>> Requires: openca-base-common >= %openca_common_req
>>>
>>> %description scep
>>>
>>> %prep
>>> #echo %_target
>>> #echo %_target_alias
>>> #echo %_target_cpu
>>> #echo %_target_os
>>> #echo %_target_vendor
>>>
>>> echo Building %{name}-%{version}-%{release}
>>>
>>> %setup -q -n %{name}-%{version}
>>>
>>> if [ ! -f configure ]; then
>>> CFLAGS="$RPM_OPT_FLAGS" ./autogen.sh
>>> fi
>>>
>>> ./configure \
>>> --prefix=%{prefix} \
>>> --with-build-dir=/var/tmp/openca-base-1.0.1/ \
>>> --with-openca-user=%{openca_usr} \
>>> --with-openca-group=%{openca_grp} \
>>> --with-ca-organization="OpenCA PKI Services" \
>>> --with-ldap-port=389 \
>>> --with-ldap-root="cn=Manager,o=OpenCA,c=IT" \
>>> --with-ldap-root-pwd="openca" \
>>> --with-openssl-prefix=%{openssl_prefix} \
>>> --enable-openscep \
>>> --with-db-type=mysql \
>>> --with-db-name=openca \
>>> --with-db-host=localhost \
>>> --with-db-port=3306 \
>>> --with-db-user=openca \
>>> --with-db-passwd="openca" \
>>> --with-service-mail-account="[EMAIL PROTECTED]" \
>>> --with-language=en_EN
>>>
>>> ## --enable-package-build \
>>>
>>> ## --with-openssl-engine=LunaCA3 \
>>> ## --with-hsm-utility=/usr/luna/bin/ca3util \
>>> ## --with-hsm-slot=1 \
>>> ## --with-hsm-appid=10:11 \
>>> # CFLAGS="$RPM_OPT_FLAGS" sh configs/[EMAIL PROTECTED]@
>>> "$RPM_BUILD_ROOT"
>>>
>>> %build
>>>
>>> make
>>>
>>> %install
>>> [ -n "$RPM_BUILD_ROOT" -a "$RPM_BUILD_ROOT" != / ] && rm -rf
>>> $RPM_BUILD_ROOT
>>>
>>> # make install-common install-modules install-ca install-batch
>>> install-ldap install-pub install-ra install-scep install-node
>>> make install-online install-offline
>>>
>>> %clean
>>> [ -n "$RPM_BUILD_ROOT" -a "$RPM_BUILD_ROOT" != / ] && rm -rf
>>> $RPM_BUILD_ROOT
>>>
>>> %files common
>>> %defattr(-, -, -)
>>>
>>> %{openca_prefix}/bin/*
>>> %{openca_prefix}/etc/openca/loa.xml
>>> %{openca_prefix}/etc/openca/log.xml
>>> %{openca_prefix}/etc/openca/token.xml
>>> %{openca_prefix}/etc/openca/config.xml
>>> %{openca_prefix}/etc/openca/ldap.xml.template
>>> %{openca_prefix}/etc/openca/menu.xml.template
>>> %{openca_prefix}/etc/openca/backup.xml.template
>>> %{openca_prefix}/etc/openca/browser_req.xml.template
>>> %{openca_prefix}/etc/openca/auth_browser_req.xml.template
>>> %{openca_prefix}/etc/openca/server_req.xml.template
>>> %{openca_prefix}/etc/openca/datasources.xml.template
>>> %{openca_prefix}/etc/openca/configure_etc.sh
>>> %{openca_prefix}/etc/init.d/openca
>>> %{openca_prefix}/etc/openca/openca_start.template
>>> %{openca_prefix}/etc/openca/openca_stop.template
>>> %{openca_prefix}/etc/openca/utf8_latin1_selector.sh.template
>>> %{openca_prefix}/etc/openca/bp/*
>>> %{openca_prefix}/etc/openca/database/*
>>> %{openca_prefix}/etc/openca/openssl/*
>>> %{openca_prefix}/etc/openca/rbac/*
>>> %{openca_prefix}/etc/openca/agreements/*
>>> %{openca_prefix}/etc/openca/contrib/*
>>> %{openca_prefix}/lib/*
>>> %{openca_prefix}/var/openca/bp/*
>>> %{openca_prefix}/var/openca/mail/*
>>> %{openca_prefix}/etc/openca/access_control/node.xml.template
>>> %{openca_prefix}/etc/openca/servers/node.conf.template
>>> %{openca_prefix}/etc/openca/menus/node-menu.xml.template
>>> %{httpd_fs_prefix}/html/pki/node/*
>>> %{httpd_fs_prefix}/cgi-bin/pki/node/*
>>>
>>> %defattr( -, %{httpd_usr}, %{httpd_grp})
>>>
>>> %dir %{openca_prefix}/var/openca/log
>>> %dir %{openca_prefix}/var/openca/crypto
>>> %dir %{openca_prefix}/var/openca/crypto/cacerts
>>> %dir %{openca_prefix}/var/openca/crypto/chain
>>> %dir %{openca_prefix}/var/openca/crypto/certs
>>> %dir %{openca_prefix}/var/openca/crypto/keys
>>> %dir %{openca_prefix}/var/openca/crypto/reqs
>>> %dir %{openca_prefix}/var/openca/tmp
>>> %dir %{openca_prefix}/var/openca/db
>>>
>>> %{openca_prefix}/var/openca/crypto/cacerts/*
>>> %{openca_prefix}/var/openca/crypto/chain/*
>>> %{openca_prefix}/var/openca/crypto/crlnumber
>>> %{openca_prefix}/var/openca/crypto/index.txt
>>> %{openca_prefix}/var/openca/crypto/keys/bp_key.pem
>>> %{openca_prefix}/var/openca/crypto/keys/keybackup_key.pem
>>> %{openca_prefix}/var/openca/crypto/keys/log_key.pem
>>> %{openca_prefix}/var/openca/crypto/serial
>>> %{openca_prefix}/var/openca/crypto/index.txt.attr
>>> %{openca_prefix}/var/openca/log/*
>>>
>>> %files ca
>>> %defattr(-, -, -)
>>>
>>> %{httpd_fs_prefix}/html/pki/ca/*
>>> %{httpd_fs_prefix}/cgi-bin/pki/ca/*
>>> %{openca_prefix}/var/openca/session/cookie/ca
>>> %{openca_prefix}/etc/openca/access_control/ca.xml.template
>>> %{openca_prefix}/etc/openca/servers/ca.conf.template
>>> %{openca_prefix}/etc/openca/menus/ca-menu.xml.template
>>>
>>> %files bp
>>> %defattr(-, -, -)
>>>
>>> %{httpd_fs_prefix}/html/pki/batch/*
>>> %{httpd_fs_prefix}/cgi-bin/pki/batch/*
>>> %{openca_prefix}/var/openca/session/cookie/batch
>>> %{openca_prefix}/etc/openca/access_control/batch.xml.template
>>> %{openca_prefix}/etc/openca/servers/batch.conf.template
>>> %{openca_prefix}/etc/openca/menus/batch-menu.xml.template
>>>
>>> %files ldap
>>> %defattr(-, -, -)
>>>
>>> %{httpd_fs_prefix}/html/pki/ldap/*
>>> %{httpd_fs_prefix}/cgi-bin/pki/ldap/*
>>> %dir %{openca_prefix}/var/openca/session/cookie/ldap
>>> %{openca_prefix}/etc/openca/access_control/ldap.xml.template
>>> %{openca_prefix}/etc/openca/servers/ldap.conf.template
>>> %{openca_prefix}/etc/openca/menus/ldap-menu.xml.template
>>>
>>> %files pub
>>> %defattr(-, -, -)
>>>
>>> %{httpd_fs_prefix}/html/pki/pub/*
>>> %{httpd_fs_prefix}/cgi-bin/pki/pub/*
>>> %{openca_prefix}/var/openca/session/cookie/pub
>>> %{openca_prefix}/etc/openca/access_control/pub.xml.template
>>> %{openca_prefix}/etc/openca/servers/pub.conf.template
>>> %{openca_prefix}/etc/openca/menus/pub-menu.xml.template
>>>
>>>
>>> %files ra
>>> %defattr(-, -, -)
>>>
>>> %{httpd_fs_prefix}/html/pki/ra/*
>>> %{httpd_fs_prefix}/cgi-bin/pki/ra/*
>>> %{openca_prefix}/var/openca/session/cookie/ra
>>> %{openca_prefix}/etc/openca/access_control/ra.xml.template
>>> %{openca_prefix}/etc/openca/servers/ra.conf.template
>>> %{openca_prefix}/etc/openca/menus/ra-menu.xml.template
>>>
>>>
>>> %files scep
>>> %defattr(-, -, -)
>>>
>>> %{httpd_fs_prefix}/cgi-bin/pki/scep/*
>>> %{openca_prefix}/var/openca/session/cookie/scep
>>> %{openca_prefix}/etc/openca/access_control/scep.xml.template
>>> %{openca_prefix}/etc/openca/servers/scep.conf.template
>>>
>>> %post
>>>
>>> %post ca
>>>
>>> echo
>>> echo "Entering POST Install Configuration of OpenCA..."
>>> cd %{openca_prefix}/etc/openca && sh configure_etc.sh CA
>>> echo "Done."
>>>
>>> %post ra
>>>
>>> echo
>>> echo "Entering POST Install Configuration of OpenCA..."
>>> cd %{openca_prefix}/etc/openca && sh configure_etc.sh RA
>>> echo "Done."
>>>
>>> %post pub
>>>
>>> echo
>>> echo "Entering POST Install Configuration of OpenCA..."
>>> cd %{openca_prefix}/etc/openca && sh configure_etc.sh Pub
>>> echo "Done."
>>>
>>> %post ldap
>>>
>>> echo
>>> echo "Entering POST Install Configuration of OpenCA..."
>>> cd %{openca_prefix}/etc/openca && sh configure_etc.sh LDAP
>>> echo "Done."
>>>
>>> %post scep
>>>
>>> echo
>>> echo "Entering POST Install Configuration of OpenCA..."
>>> cd %{openca_prefix}/etc/openca && sh configure_etc.sh SCEP
>>> echo "Done."
>>>
>>> %post bp
>>>
>>> echo
>>> echo "Entering POST Install Configuration of OpenCA..."
>>> cd %{openca_prefix}/etc/openca && sh configure_etc.sh BP
>>> echo "Done."
>>>
>>> %post common
>>>
>>> echo
>>> echo -n "Linking startup script (openca) in init.d/ dir ... "
>>> ln -s %{openca_prefix}/etc/init.d/openca /etc/init.d/openca
>>> echo "Done."
>>>
>>> %postun common
>>>
>>> echo "Removing init.d/openca link ... "
>>> rm -f /etc/init.d/openca
>>> echo "Done."
>>>
>>> echo -n "Removing empty directories ... "
>>> rmdir %{prefix}/bin 2>/dev/null
>>> rmdir %{openca_prefix}/lib/openca/perl_modules 2>/dev/null
>>> rm -rf %{openca_prefix}/lib/openca/mails/* 2>/dev/null
>>> rmdir %{openca_prefix}/lib/openca/mails 2>/dev/null
>>> rmdir %{openca_prefix}/lib/openca 2>/dev/null
>>> echo "Done."
>>>
>>> echo
>>> echo "Please check the %{prefix} directory for remaining files."
>>> echo
>>>
>>>
>>> %changelog
>>> * Mon Sep 18 2006 Massimiliano Pala <[EMAIL PROTECTED]>
>>> -First Packaging for OpenCA-Base
>>>
>>>
>>>
>>>
>>
>>
>> --------------------------------------------------------------------------------
>>
>>
>>
>>> # OpenCA Base Tools RPM File
>>> # (c) 2006 by Massimiliano Pala and OpenCA Team
>>> # OpenCA Licensed Software
>>>
>>> # %define __find_requires %{nil}
>>> %define debug_package %{nil}
>>>
>>> # %define _unpackaged_files_terminate_build 0
>>> # %define _missing_doc_files_terminate_build 0
>>>
>>> %define is_mandrake %(test -e /etc/mandrake-release && echo 1 || echo 0)
>>> %define is_suse %(test -e /etc/SuSE-release && echo 1 || echo 0)
>>> %define is_fedora %(test -e /etc/fedora-release && echo 1 || echo 0)
>>> %define is_centos %(test -e /etc/fedora-release && grep -q CentOS
>>> /etc/redhat-release && echo 1 || echo 0)
>>>
>>> %define dist redhat
>>> %define disttag el
>>>
>>> %if %is_mandrake
>>> %define dist mandrake
>>> %define disttag mdk
>>> %endif
>>> %if %is_suse
>>> %define dist suse
>>> %define disttag suse
>>> %define nogroup nogroup
>>> %define httpd_usr wwwwrun
>>> %define httpd_grp nogroup
>>> %endif
>>> %if %is_fedora
>>> %define dist fedora
>>> %define disttag rhfc
>>> %endif
>>> %if %is_centos
>>> %define dist centos
>>> %define disttag el
>>> %endif
>>>
>>>
>>>
>>> %define distver %(release="`rpm -q --queryformat='%{VERSION}'
>>> %{dist}-release 2> /dev/null | tr . : | sed s/://g`" ; if test $? != 0 ;
>>> then release="" ; fi ; echo "$release")
>>> #%define distver 5
>>> %define packer %(finger -lp `echo "$USER"` | head -n 1 | cut -d ' ' -f
>>> 2)
>>>
>>> %define ver 1.1.0
>>> %define RELEASE 1
>>> %define rel %{?CUSTOM_RELEASE} %{!?CUSTOM_RELEASE:%RELEASE}
>>> %define prefix /usr
>>> %define mand /usr/man
>>> %define sslprefix /usr/local/openssl
>>> %define openssl_req 0.9.7
>>> %define openldap_req 2.2
>>>
>>> Summary: OpenCA Base Tools
>>> Name: openca-tools
>>> Version: %ver
>>> Release: %rel.%{disttag}%{distver}
>>> License: OpenCA License (BSD Style)
>>> Group: Network/Daemons
>>> Source: openca-tools-%{ver}.tar.gz
>>> BuildRoot: /var/tmp/openca-tools-%{ver}-root
>>> URL: http://www.openca.org/projects/ocspd
>>> Packager: %packer
>>> Docdir: %{prefix}/doc
>>> Prefix: %prefix
>>> BuildRequires: openssl-devel >= %openssl_req
>>> Requires: openssl >= %openssl_req
>>>
>>> %description
>>> OpenCA Tools provide command line facilities for (1) digital
>>> signatures generation and verifications and for (2) SCEP message
>>> handling.
>>>
>>> %prep
>>> %setup
>>>
>>> %ifarch alpha
>>> ARCH_FLAGS="--host=alpha-redhat-linux"
>>> %endif
>>>
>>> if [ ! -f configure ]; then
>>> CFLAGS="$RPM_OPT_FLAGS" ./autogen.sh
>>> $ARCH_FLAGS --prefix=%{prefix} --with-openssl-prefix=%{sslprefix}
>>> --enable-openssl-engine
>>> --mandir=%{mand} --disable-shared
>>> else
>>> CFLAGS="$RPM_OPT_FLAGS" ./configure
>>> $ARCH_FLAGS --prefix=%{prefix} --with-openssl-prefix=%{sslprefix}
>>> --enable-openssl-engine
>>> --mandir=%{mand} --disable-shared
>>> fi
>>>
>>> %build
>>>
>>> if [ "$SMP" != "" ]; then
>>> (make "MAKE=make -k -j $SMP"; exit 0)
>>> make
>>> else
>>> make
>>> fi
>>>
>>> %install
>>> [ -n "$RPM_BUILD_ROOT" -a "$RPM_BUILD_ROOT" != / ] && rm -rf
>>> $RPM_BUILD_ROOT
>>>
>>> make prefix=$RPM_BUILD_ROOT%{prefix} mandir=$RPM_BUILD_ROOT%{mand}
>>> install
>>>
>>> %clean
>>> [ -n "$RPM_BUILD_ROOT" -a "$RPM_BUILD_ROOT" != / ] && rm -rf
>>> $RPM_BUILD_ROOT
>>>
>>> %files
>>> %defattr(-, root, root)
>>>
>>> %doc AUTHORS COPYING INSTALL ChangeLog NEWS README VERSION
>>>
>>> %{prefix}/bin/*
>>> %{mand}/*
>>>
>>> %post
>>>
>>> %postun
>>>
>>>
>>> %changelog
>>> * Mon Oct 9 2006 Massimiliano Pala <[EMAIL PROTECTED]>
>>> - New Package building for openca-tools
>>> - Fixed VERSION and PACKAGE_VERSION variables
>>>
>>> * Mon Sep 18 2006 Massimiliano Pala <[EMAIL PROTECTED]>
>>> -First Package version (removed tools from OpenCA-Base)
>>>
>>>
>>>
>>>
>>
>>
>> --------------------------------------------------------------------------------
>>
>>
>>
>>> -------------------------------------------------------------------------
>>> This SF.Net email is sponsored by the Moblin Your Move Developer's
>>> challenge
>>> Build the coolest Linux based applications with Moblin SDK & win great
>>> prizes
>>> Grand prize is a trip for two to an Open Source event anywhere in the
>>> world
>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
>>>
>>
>>
>> --------------------------------------------------------------------------------
>>
>>
>>
>>> _______________________________________________
>>> Openca-Users mailing list
>>> Openca-Users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/openca-users
>>>
>>>
>>
>>
>> -------------------------------------------------------------------------
>> This SF.Net email is sponsored by the Moblin Your Move Developer's
>> challenge
>> Build the coolest Linux based applications with Moblin SDK & win great
>> prizes
>> Grand prize is a trip for two to an Open Source event anywhere in the
>> world
>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
>> _______________________________________________
>> Openca-Users mailing list
>> Openca-Users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/openca-users
>>
>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the
> world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Openca-Users mailing list
> Openca-Users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/openca-users
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Openca-Users mailing list
Openca-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openca-users
