I think that this card is telling you very little: 3F Inverse data coding 2F TB1 present, followed by 15 historical bytes 00 TB1 telling you nothing (card does not use a separate programming voltage supply) 80 Start of historical bytes 69 tag 46 (pre-issuing data), length 09
But there appear to be only 14 historical bytes, and the meaning of the last 3 is not obvious. Maybe the card has never been personalised, maybe it is locked, or maybe the module is not working properly. Peter ----- Original Message ----- From: "Shahul Hameed" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, November 08, 2002 1:21 AM Subject: [OCF] No response on GSM SIM- Customer evaluation platform > Hi, > I am developing SIM driver API for customer board. > I am able to receive the following ATR response from GSM SIM on customer > mobile station evaluation board. > 0x3F,0x2F,0x00,0x80,0x69,0xAF,0x03,0x07,0x01,0x59,0x00,0x00,0x0A,0x0E,0x83, > > 0x3E,0x9F,0x16. > Please clarify the following doubts? > ========================== > > Whether this ATR message requires PPS procedure? > > I tried the following as PPS values, but no response from SIM Interface. > > 0xFF, 0x00, 0xFF. > > I tried the other commans like Select, CHV disable, CHV status..etc., > still no response from SIM IF. Transmitting commands going > successfully to SIM IF. > > As per my interpretation of standard 11.11, SIM IF should return SW1,SW2 > irrespective of the types of command. > > Thanks in advance, > Shahul. > > Shahul Hameed, > Sasken Communication Tech. Ltd., > Bangalore. India. --- > Visit the OpenCard web site at http://www.opencard.org/ for more > information on OpenCard---binaries, source code, documents. > This list is being archived at http://www.opencard.org/archive/opencard/ ! To unsubscribe from the [EMAIL PROTECTED] mailing list send an email ! to ! [EMAIL PROTECTED] ! containing the word ! unsubscribe ! in the body.
