Hi, Thanks a lot for your reply.
Wwhat additional information should be expected out of ATR? W hen I tried a different SIM card in customer platform, except the historical characters other characters are same as mentioned here. Can you please detail me on what is meant by card personalization/ card locked/module not working properly.? Does it mean that SIM card Interface is not working properly or SIM card is having a problem.? If SIM card is having problem, then when I tried other SIM card (working in other mobile), should have given different ATR? Thanks in advance, Shahul. On Thu, 7 Nov 2002, Peter Tomlinson wrote: > I think that this card is telling you very little: > > 3F Inverse data coding > 2F TB1 present, followed by 15 historical bytes > 00 TB1 telling you nothing (card does not use a separate programming voltage > supply) > 80 Start of historical bytes > 69 tag 46 (pre-issuing data), length 09 > > But there appear to be only 14 historical bytes, and the meaning of the last > 3 is not obvious. > > Maybe the card has never been personalised, maybe it is locked, or maybe the > module is not working properly. > > Peter > ----- Original Message ----- > From: "Shahul Hameed" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, November 08, 2002 1:21 AM > Subject: [OCF] No response on GSM SIM- Customer evaluation platform > > > > Hi, > > I am developing SIM driver API for customer board. > > I am able to receive the following ATR response from GSM SIM on customer > > mobile station evaluation board. > > > 0x3F,0x2F,0x00,0x80,0x69,0xAF,0x03,0x07,0x01,0x59,0x00,0x00,0x0A,0x0E,0x83, > > > > 0x3E,0x9F,0x16. > > Please clarify the following doubts? > > ========================== > > > > Whether this ATR message requires PPS procedure? > > > > I tried the following as PPS values, but no response from SIM Interface. > > > > 0xFF, 0x00, 0xFF. > > > > I tried the other commans like Select, CHV disable, CHV status..etc., > > still no response from SIM IF. Transmitting commands going > > successfully to SIM IF. > > > > As per my interpretation of standard 11.11, SIM IF should return SW1,SW2 > > irrespective of the types of command. > > > > Thanks in advance, > > Shahul. > > > > Shahul Hameed, > > Sasken Communication Tech. Ltd., > > Bangalore. India. > > > > > --- > > Visit the OpenCard web site at http://www.opencard.org/ for more > > information on OpenCard---binaries, source code, documents. > > This list is being archived at http://www.opencard.org/archive/opencard/ > > ! To unsubscribe from the [EMAIL PROTECTED] mailing list send an email > ! to > ! [EMAIL PROTECTED] > ! containing the word > ! unsubscribe > ! in the body. > --- > Visit the OpenCard web site at http://www.opencard.org/ for more > information on OpenCard---binaries, source code, documents. > This list is being archived at http://www.opencard.org/archive/opencard/ ! To unsubscribe from the [EMAIL PROTECTED] mailing list send an email ! to ! [EMAIL PROTECTED] ! containing the word ! unsubscribe ! in the body.
