configure.ac | 2
src/via_display.c | 142 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 143 insertions(+), 1 deletion(-)
New commits:
commit b7fe9e594d4a16764de0661d470bb46053b62fb2
Author: Kevin Brace <kevinbr...@gmx.com>
Date: Thu Jun 9 20:11:34 2016 -0500
Version bumped to 0.4.171
This version fixes a bug where CLE266 was not working properly if
"CRT + TV" was specified in BIOS setup. This bug was observed with
VIA Embedded EPIA-M mainboard (CLE266 + VT1622A).
Signed-off-by: Kevin Brace <kevinbr...@gmx.com>
diff --git a/configure.ac b/configure.ac
index bedaffb..ecbc0de 100644
--- a/configure.ac
+++ b/configure.ac
@@ -23,7 +23,7 @@
# Initialize Autoconf
AC_PREREQ(2.57)
AC_INIT([xf86-video-openchrome],
- [0.4.170],
+ [0.4.171],
[https://bugs.freedesktop.org/enter_bug.cgi?product=xorg&component=Driver/openchrome],
[xf86-video-openchrome])
commit 97b17c6823bdf2b0fe07574da2dea464d1ea3730
Author: Kevin Brace <kevinbr...@gmx.com>
Date: Thu Jun 9 20:09:04 2016 -0500
Initializing CR6A, CR6B, and CR6C when mode setting is done
Not all the register fields of CR6A (3X5.6A), CR6B (3X5.6B), and
CR6C (3X5.6C) were being initialized, and as a result, specifying
the availability of TV out in the BIOS setup will lead to analog out
(VGA) not working properly. Specifically, CR6B[7:6] and CR6C[0]
were causing problems. CR6C controls DIP0 (Digital Interface Port 0)
and exists at this address only in CLE266 (DIP0 is called DVP0 since
KM400 chipset, and DVP0 control register is located at CR96.).
This bug was observed with VIA Embedded EPIA-M mainboard (CLE266 chipset
with VT1622 TV encoder), and likely only affects CLE266 chipset.
Signed-off-by: Xavier Bachelot <xav...@bachelot.org>
Signed-off-by: Kevin Brace <kevinbr...@gmx.com>
diff --git a/src/via_display.c b/src/via_display.c
index 957d02f..da144a2 100644
--- a/src/via_display.c
+++ b/src/via_display.c
@@ -267,6 +267,7 @@ void
viaIGAInitCommon(ScrnInfoPtr pScrn)
{
vgaHWPtr hwp = VGAHWPTR(pScrn);
+ VIAPtr pVia = VIAPTR(pScrn);
#ifdef HAVE_DEBUG
CARD8 temp;
#endif
@@ -311,6 +312,16 @@ viaIGAInitCommon(ScrnInfoPtr pScrn)
temp = hwp->readCrtc(hwp, 0x36);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"CR36: 0x%02X\n", temp));
+ temp = hwp->readCrtc(hwp, 0x6B);
+ DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
+ "CR6B: 0x%02X\n", temp));
+
+ if (pVia->Chipset == VIA_CLE266) {
+ temp = hwp->readCrtc(hwp, 0x6C);
+ DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
+ "CR6C: 0x%02X\n", temp));
+ }
+
#endif
/* Be careful with 3C5.15[5] - Wrap Around Disable.
@@ -493,6 +504,31 @@ viaIGAInitCommon(ScrnInfoPtr pScrn)
* 1: Enable */
ViaCrtcMask(hwp, 0x36, 0x01, 0x01);
+ /* 3X5.6B[3] - Simultaneous Display Enable
+ * 0: Disable
+ * 1: Enable */
+ ViaCrtcMask(hwp, 0x6B, 0x00, 0x08);
+
+ /* CLE266 only. */
+ if (pVia->Chipset == VIA_CLE266) {
+ /* The following register fields are for CLE266 only. */
+ /* 3X5.6C - Digital Interface Port 0 (DIP0) Control
+ * 3X5.6C[7] - DIP0 Source
+ * 0: IGA1
+ * 1: IGA2
+ * 3X5.6C[4:2] - Appears to be related to DIP0 signal polarity
+ * control. Used by CLE266A2 to workaround a bug when
+ * it is utilizing an external TV encoder.
+ * 3X5.6C[1] - Appears to be utilized when CLE266 is utilizing an
+ * external TV encoder.
+ * 3X5.6C[0] - Appears to be a bit to control internal / external
+ * clock source or whether or not the VCK (IGA1 clock
+ * source) comes from VCK PLL or from an external
+ * source. This bit should be set to 1 when TV encoder
+ * is in use. */
+ ViaCrtcMask(hwp, 0x6C, 0x00, 0x01);
+ }
+
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Exiting viaIGAInitCommon.\n"));
}
@@ -504,6 +540,7 @@ void
viaIGA1Init(ScrnInfoPtr pScrn)
{
vgaHWPtr hwp = VGAHWPTR(pScrn);
+ VIAPtr pVia = VIAPTR(pScrn);
#ifdef HAVE_DEBUG
CARD8 temp;
#endif
@@ -524,6 +561,18 @@ viaIGA1Init(ScrnInfoPtr pScrn)
temp = hwp->readCrtc(hwp, 0x33);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"CR33: 0x%02X\n", temp));
+ temp = hwp->readCrtc(hwp, 0x6B);
+ DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
+ "CR6B: 0x%02X\n", temp));
+
+ /* For UniChrome Pro and Chrome9. */
+ if ((pVia->Chipset != VIA_CLE266)
+ && (pVia->Chipset != VIA_KM400)) {
+ temp = hwp->readCrtc(hwp, 0x6C);
+ DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
+ "CR6C: 0x%02X\n", temp));
+ }
+
#endif
/* 3C5.1B[7:6] - Secondary Display Engine (Gated Clock <LCK>)
@@ -611,6 +660,32 @@ viaIGA1Init(ScrnInfoPtr pScrn)
* 111: Shift to early time by 2 characters */
ViaCrtcMask(hwp, 0x33, 0x00, 0xCF);
+ /* TV out uses division by 2 mode.
+ * Other devices like analog (VGA), DVI, flat panel, etc.,
+ * use normal mode. */
+ /* 3X5.6B[7:6] - First Display Channel Clock Mode Selection
+ * 0x: Normal
+ * 1x: Division by 2 */
+ ViaCrtcMask(hwp, 0x6B, 0x00, 0xC0);
+
+ /* For UniChrome Pro and Chrome9. */
+ if ((pVia->Chipset != VIA_CLE266)
+ && (pVia->Chipset != VIA_KM400)) {
+ /* The following register fields are for UniChrome Pro and Chrome9. */
+ /* 3X5.6C[7:5] - VCK PLL Reference Clock Source Selection
+ * 000: From XI pin
+ * 001: From TVXI
+ * 01x: From TVPLL
+ * 100: DVP0TVCLKR
+ * 101: DVP1TVCLKR
+ * 110: CAP0 Clock
+ * 111: CAP1 Clock
+ * 3X5.6C[4] - VCK Source Selection
+ * 0: VCK PLL output clock
+ * 1: VCK PLL reference clock */
+ ViaCrtcMask(hwp, 0x6C, 0x00, 0xF0);
+ }
+
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Exiting viaIGA1Init.\n"));
}
@@ -1679,6 +1754,7 @@ void
viaIGA2Init(ScrnInfoPtr pScrn)
{
vgaHWPtr hwp = VGAHWPTR(pScrn);
+ VIAPtr pVia = VIAPTR(pScrn);
#ifdef HAVE_DEBUG
CARD8 temp;
#endif
@@ -1693,6 +1769,21 @@ viaIGA2Init(ScrnInfoPtr pScrn)
temp = hwp->readSeq(hwp, 0x2D);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"SR2D: 0x%02X\n", temp));
+ temp = hwp->readCrtc(hwp, 0x6A);
+ DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
+ "CR6A: 0x%02X\n", temp));
+ temp = hwp->readCrtc(hwp, 0x6B);
+ DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
+ "CR6B: 0x%02X\n", temp));
+
+ /* For UniChrome Pro and Chrome9. */
+ if ((pVia->Chipset != VIA_CLE266)
+ && (pVia->Chipset != VIA_KM400)) {
+ temp = hwp->readCrtc(hwp, 0x6C);
+ DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
+ "CR6C: 0x%02X\n", temp));
+ }
+
#endif
/* 3C5.1B[7:6] - Secondary Display Engine (Gated Clock <LCK>)
@@ -1729,6 +1820,57 @@ viaIGA2Init(ScrnInfoPtr pScrn)
* 11: PLL on/off according to the PMS */
ViaSeqMask(hwp, 0x2D, 0x0C, 0x0C);
+ /* 3X5.6A[7] - Second Display Channel Enable
+ * 0: Disable
+ * 1: Enable
+ * 3X5.6A[6] - Second Display Channel Reset
+ * 0: Reset
+ * 3X5.6A[5] - Second Display 8/6 Bits LUT
+ * 0: 6-bit
+ * 1: 8-bit
+ * 3X5.6A[4] - Horizontal Count by 2
+ * 0: Disable
+ * 1: Enable
+ * 3X5.6A[1] - LCD Gamma Enable
+ * 0: Disable
+ * 1: Enable
+ * 3X5.6A[0] - LCD Pre-fetch Mode Enable
+ * 0: Disable
+ * 1: Enable */
+ ViaCrtcMask(hwp, 0x6A, 0x80, 0xB3);
+
+ /* TV out uses division by 2 mode.
+ * Other devices like analog (VGA), DVI, flat panel, etc.,
+ * use normal mode. */
+ /* 3X5.6B[5:4] - Second Display Channel Clock Mode Selection
+ * 0x: Normal
+ * 1x: Division by 2
+ * 3X5.6B[2] - IGA2 Screen Off
+ * 0: Normal
+ * 1: Screen off
+ * 3X5.6B[1] - IGA2 Screen Off Selection Method
+ * 0: IGA2 Screen off
+ * 1: IGA1 Screen off */
+ ViaCrtcMask(hwp, 0x6B, 0x00, 0x36);
+
+ /* For UniChrome Pro and Chrome9. */
+ if ((pVia->Chipset != VIA_CLE266)
+ && (pVia->Chipset != VIA_KM400)) {
+ /* The following register fields are for UniChrome Pro and Chrome9. */
+ /* 3X5.6C[3:1] - LCDCK PLL Reference Clock Source Selection
+ * 000: From XI pin
+ * 001: From TVXI
+ * 01x: From TVPLL
+ * 100: DVP0TVCLKR
+ * 101: DVP1TVCLKR
+ * 110: CAP0 Clock
+ * 111: CAP1 Clock
+ * 3X5.6C[0] - LCDCK Source Selection
+ * 0: LCDCK PLL output clock
+ * 1: LCDCK PLL reference clock */
+ ViaCrtcMask(hwp, 0x6C, 0x00, 0x0F);
+ }
+
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Exiting viaIGA2Init.\n"));
}
_______________________________________________
Openchrome-devel mailing list
Openchrome-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/openchrome-devel
