I still trying to enable 3D accell using openchrome driver on opensuse 11.2 on 11.1 is working fine
I compiled from SVN driver with debug options and this is what I get the /dev/dri/card0 is ok the agpgart is ok the dri is loading but finaly xorg says that (II) CHROME(0): direct rendering disabled below are detailed informations Maybe you have some idea what is wrong ls -l /dev/dri/ razem 0 crw-rw----+ 1 root video 226, 0 06-14 12:38 card0 #dmesg | grep -e agp -e drm [ 1.096663] Linux agpgart interface v0.103 [ 7.528954] agpgart: Detected VIA VT3314 chipset [ 7.548207] agpgart-via 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 20.508908] [drm] Initialized drm 1.1.0 20060810 [ 20.585814] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0 [ 20.691840] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 20.691880] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x [ 20.691890] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode [ 20.741633] [drm:via_do_init_map] *ERROR* failed to find dma buffer region! #grep openchrome /var/log/Xorg.0.log (II) LoadModule: "openchrome" (II) Loading /usr/lib/xorg/modules/updates//drivers/openchrome_drv.so (II) Module openchrome: vendor="http://openchrome.org/"; (!!) For support, please refer to http://www.openchrome.org/. #grep rendering /var/log/Xorg.0.log (II) CHROME(0): direct rendering disabled #grep "^(EE)" /var/log/Xorg.0.log NULL #grep "^(WW)" /var/log/Xorg.0.log (...) (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Keyboard[0] (WW) Disabling Mouse[1] (WW) CHROME(0): Panel on K8M800, PM800, VM800, P4M890, K8M890, CX700 or P4M900 is currently not supported. (WW) CHROME(0): Using VBE to set modes to work around this. (WW) CHROME(0): [XvMC] Cannot use XvMC without DRI! (WW) CHROME(0): Option "PreferredMode" is not used #cat /etc/X11/xorg.conf (...) Section "Module" Load "glx" Load "dri" Load "dbe" Load "extmod" EndSection (...) Section "Device" BoardName "Framebuffer Graphics" Driver "openchrome" Identifier "Device[0]" VendorName "VESA" Option "XaaNoImageWriteRect" Option "NoAccel" "False" Option "EnableAGPDMA" "True" EndSection (...) Section "DRI" Group "video" Mode 0666 EndSection And debug from xorg.0.log #cat /var/log/Xorg.0.log | grep CHROME (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, KM400/KN400, (II) CHROME(0): VIAPreInit (II) CHROME(0): VIAGetRec (**) CHROME(0): Depth 24, (--) framebuffer bpp 32 (==) CHROME(0): RGB weight 888 (==) CHROME(0): Default visual is TrueColor (--) CHROME(0): Chipset: P4M800Pro/VN800/CN700 (--) CHROME(0): Chipset revision: 0 (--) CHROME(0): Probed amount of VideoRAM = 65536 kB (II) CHROME(0): Setting up default chipset options. (II) CHROME(0): VIASetupDefaultOptions (II) CHROME(0): Reading config file... (**) CHROME(0): Option "NoAccel" "False" (**) CHROME(0): Option "EnableAGPDMA" "True" (II) CHROME(0): Starting to parse config file options... (==) CHROME(0): Shadow framebuffer is disabled. (**) CHROME(0): Hardware acceleration is enabled. (==) CHROME(0): Using XAA acceleration architecture. (==) CHROME(0): Using hardware two-color cursors and software full-color cursors. (==) CHROME(0): GPU virtual command queue will be enabled. (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled. (**) CHROME(0): AGP DMA will be enabled if DRI is enabled. (==) CHROME(0): AGP DMA will be used for 2D acceleration. (==) CHROME(0): PCI DMA will be used for XV image transfer if DRI is enabled. (==) CHROME(0): Will not enable VBE modes. (==) CHROME(0): VBE VGA register save & restore will not be used (==) CHROME(0): Xv Bandwidth check is enabled. (==) CHROME(0): Will not impose a limit on video RAM reserved for DRI. (==) CHROME(0): Will try to allocate 32768 kB of AGP memory. (==) CHROME(0): Digital output bus width is 12 bits. (==) CHROME(0): DVI Center is disabled. (==) CHROME(0): Panel size is not selected from config file. (==) CHROME(0): Panel will not be forced. (==) CHROME(0): TV dotCrawl is disabled. (==) CHROME(0): TV deflicker is set to 0. (==) CHROME(0): No default TV type is set. (==) CHROME(0): No default TV output signal type is set. (II) CHROME(0): VIAMapMMIO (--) CHROME(0): mapping MMIO @ 0xd1000000 with size 0x9000 (--) CHROME(0): mapping BitBlt MMIO @ 0xd1200000 with size 0x20000 (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) CHROME(0): Will not print VGA registers. (==) CHROME(0): Will not scan I2C buses. (II) CHROME(0): ...Finished parsing config file options. (--) CHROME(0): Detected Fujitsu/Siemens Amilo Pro V2030. (II) CHROME(0): Detected MemClk 3 (II) CHROME(0): ViaGetMemoryBandwidth (II) CHROME(0): Detected TV standard: PAL. (==) CHROME(0): Using gamma correction (1.0, 1.0, 1.0) (II) CHROME(0): ViaI2CInit (II) CHROME(0): ViaI2CBus1Init (II) CHROME(0): I2C bus "I2C bus 1" initialized. (II) CHROME(0): ViaI2cBus2Init (II) CHROME(0): I2C bus "I2C bus 2" initialized. (II) CHROME(0): ViaI2CBus3Init (II) CHROME(0): I2C bus "I2C bus 3" initialized. (II) CHROME(0): I2C device "I2C bus 1:E-EDID segment register" registered at address 0x60. (II) CHROME(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0. (II) CHROME(0): ViaOutputsDetect (II) CHROME(0): Enabling panel from PCI-subsystem ID information. (II) CHROME(0): VIATVDetect (II) CHROME(0): ViaOutputsSelect (II) CHROME(0): ViaOutputsSelect: X Configuration: 0x00 (II) CHROME(0): ViaOutputsSelect: BIOS Initialised register: 0x07 (II) CHROME(0): ViaOutputsSelect: Panel. (WW) CHROME(0): Panel on K8M800, PM800, VM800, P4M890, K8M890, CX700 or P4M900 is currently not supported. (WW) CHROME(0): Using VBE to set modes to work around this. (II) CHROME(0): initializing int10 (II) CHROME(0): Primary V_BIOS segment is: 0xc000 (II) CHROME(0): VESA BIOS detected (II) CHROME(0): VESA VBE Version 3.0 (II) CHROME(0): VESA VBE Total Mem: 65536 kB (II) CHROME(0): VESA VBE OEM: VIA P4N800 PRO (II) CHROME(0): VESA VBE OEM Software Rev: 1.0 (II) CHROME(0): VESA VBE OEM Vendor: (II) CHROME(0): VESA VBE OEM Product: (II) CHROME(0): VESA VBE OEM Product Rev: (II) CHROME(0): Searching for matching VESA mode(s): (II) CHROME(0): Monitor[0]: Using hsync range of 29.00-60.00 kHz (II) CHROME(0): Monitor[0]: Using vrefresh range of 50.00-60.00 Hz (II) CHROME(0): Not using mode "1024x600" (no mode of this name) (II) CHROME(0): Not using mode "768x576" (no mode of this name) (II) CHROME(0): Not using built-in mode "1600x1200" (width too large for virtual size) (II) CHROME(0): Not using built-in mode "1280x1024" (width too large for virtual size) (II) CHROME(0): Not using built-in mode "1280x768" (width too large for virtual size) (II) CHROME(0): Attempting to use 60Hz refresh for mode "1024x768" (118) (II) CHROME(0): Attempting to use 60Hz refresh for mode "800x600" (115) (II) CHROME(0): Attempting to use 60Hz refresh for mode "640x480" (112) (--) CHROME(0): Virtual size is 1024x768 (pitch 1024) (**) CHROME(0): *Built-in mode "1024x768": 0.0 MHz, 48363.6 kHz, 60.5 Hz (II) CHROME(0): Modeline "1024x768"x60.5 0.00 1024 0 0 0 768 0 0 0 (48363.6 kHz) (**) CHROME(0): *Built-in mode "800x600": 0.0 MHz, 37324.7 kHz, 60.5 Hz (II) CHROME(0): Modeline "800x600"x60.5 0.00 800 0 0 0 600 0 0 0 (37324.7 kHz) (**) CHROME(0): *Built-in mode "640x480": 0.0 MHz, 29825.5 kHz, 60.5 Hz (II) CHROME(0): Modeline "640x480"x60.5 0.00 640 0 0 0 480 0 0 0 (29825.5 kHz) (**) CHROME(0): Built-in mode "720x576" (**) CHROME(0): Built-in mode "720x540" (**) CHROME(0): Built-in mode "800x480" (**) CHROME(0): Built-in mode "720x480" (**) CHROME(0): Display dimensions: (345, 259) mm (**) CHROME(0): DPI set to (75, 75) (II) CHROME(0): VIAUnmapMem (II) CHROME(0): VIAScreenInit (II) CHROME(0): VIAMapFB (--) CHROME(0): mapping framebuffer @ 0xf0000000 with size 0x4000000 (--) CHROME(0): Frame buffer start: 0xb384a000, free start: 0x300000 end: 0x4000000 (II) CHROME(0): VIAMapMMIO (--) CHROME(0): mapping MMIO @ 0xd1000000 with size 0x9000 (--) CHROME(0): mapping BitBlt MMIO @ 0xd1200000 with size 0x20000 (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) CHROME(0): VIASave (II) CHROME(0): Primary (II) CHROME(0): Crtc... (II) CHROME(0): TVSave... (II) CHROME(0): Trying VBE Mode 1024x768 (0xc118) Refresh 75.69: (II) CHROME(0): ViaVbeSetRefresh (II) CHROME(0): Active Device: 2 (II) CHROME(0): Refresh Rate Index: 5 (II) CHROME(0): VBESetVBEMode failed...but worked OK without customized refresh and dotclock. (II) CHROME(0): VIAAdjustFrame (II) CHROME(0): - Blanked (II) CHROME(0): [drm] Using the DRM lock SAREA also for drawables. (II) CHROME(0): [drm] framebuffer handle = 0xf0000000 (II) CHROME(0): [drm] added 1 reserved context for kernel (II) CHROME(0): X context handle = 0x1 (II) CHROME(0): [drm] installed DRM signal handler (II) CHROME(0): [dri] visual configs initialized. (II) CHROME(0): [drm] register handle = 0xd1000000 (II) CHROME(0): [drm] framebuffer handle = 0xf0000000 (II) CHROME(0): [drm] mmio Registers = 0xd1000000 (II) CHROME(0): [dri] mmio mapped. (II) CHROME(0): - Visuals set up (II) CHROME(0): VIAInternalScreenInit (II) CHROME(0): - B & W (II) CHROME(0): Using 2304 lines for offscreen memory. (**) CHROME(0): Option "XaaNoImageWriteRect" (II) CHROME(0): Using XFree86 Acceleration Architecture (XAA) (==) CHROME(0): Backing store disabled (II) CHROME(0): - Backing store set up (II) CHROME(0): - SW cursor set up (II) CHROME(0): VIAHWCursorInit (II) CHROME(0): - Def Color map set up (II) CHROME(0): VIALoadPalette (II) CHROME(0): VIALoadRgbLut (II) CHROME(0): VIALoadRgbLut (II) CHROME(0): - Palette loaded (**) CHROME(0): DPMS enabled (II) CHROME(0): - DPMS set up (II) CHROME(0): - Color maps etc. set up (II) CHROME(0): [drm] Detected AGP vendor 0x1106, device 0x0314 (II) CHROME(0): [drm] Didn't find any AGP v3 compatible device. Trying AGP 4X mode. (II) CHROME(0): [drm] Trying to enable AGP fast writes. (II) CHROME(0): [drm] drmAgpEnabled succeeded (II) CHROME(0): [drm] agpAddr = 0xe0000000 (II) CHROME(0): [drm] agpBase = (nil) (II) CHROME(0): [drm] agpAddr = 0xe0000000 (II) CHROME(0): [drm] agpSize = 0x01e00000 (II) CHROME(0): [drm] agp physical addr = 0x00000000 (II) CHROME(0): [dri] Using AGP. (II) CHROME(0): [drm] Using 54251488 bytes for DRM memory heap. (II) CHROME(0): [dri] Frame buffer initialized. (II) CHROME(0): [DRI] installation complete (II) CHROME(0): [drm] Freeing agp memory (II) CHROME(0): [drm] Releasing agp module (II) CHROME(0): [drm] removed 1 reserved context for kernel (II) CHROME(0): [drm] unmapping 8192 bytes of SAREA 0xf90af000 at 0xb808c000 (II) CHROME(0): [drm] Closed DRM master. (II) CHROME(0): direct rendering disabled (II) CHROME(0): Benchmarking video copy. Less time is better. (--) CHROME(0): Timed libc YUV420 copy... 15841087. Throughput: 56.4 MiB/s. (--) CHROME(0): Timed kernel YUV420 copy... 11956159. Throughput: 74.8 MiB/s. (--) CHROME(0): Timed SSE YUV420 copy... 6270181. Throughput: 142.6 MiB/s. (--) CHROME(0): Timed MMX YUV420 copy... 6250671. Throughput: 143.1 MiB/s. (--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by CPU. (--) CHROME(0): Timed MMX2 YUV420 copy... 6170497. Throughput: 144.9 MiB/s. (--) CHROME(0): Using MMX2 YUV42X copy for video. (WW) CHROME(0): [XvMC] Cannot use XvMC without DRI! (WW) CHROME(0): Option "PreferredMode" is not used (II) CHROME(0): - Done (II) CHROME(0): VIALoadPalette (II) CHROME(0): VIALoadRgbLut (II) CHROME(0): VIALoadRgbLut (II) CHROME(0): VIALoadPalette (II) CHROME(0): VIALoadRgbLut (II) CHROME(0): VIALoadRgbLut _______________________________________________ openchrome-users mailing list [email protected] http://wiki.openchrome.org/mailman/listinfo/openchrome-users Main page: http://www.openchrome.org Wiki: http://wiki.openchrome.org User Forum: http://wiki.openchrome.org/tikiwiki/tiki-view_forum.php?forumId=1
