Hi everybody, I'm trying to enable 3d accel on my via epia m10000 but I have no luck. The distro is a 10.04 mythbuntu.
The M1000 has a CLE266 chipset which should be well supported by
openchrome.
Here are the things I've done up till now:
- drm module is loaded at kernel startup. Here's what I get at boot:
$ dmesg |grep -e drm -e agp
[ 0.000000] Linux version 2.6.32-24-generic (bui...@palmer) (gcc version
4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010
(Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5)
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic
root=UUID=a2ee4f9b-1db7-414c-9678-920310fd56c2 ro
crashkernel=384M-2G:64M,2G-:128M quiet splash drm.debug=1 log_buf_len=16M
[ 12.326378] Linux agpgart interface v0.103
[ 13.969611] [drm] Initialized drm 1.1.0 20060810
[ 14.003008] agpgart: Detected VIA CLE266 chipset
[ 14.020903] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 15.172767] [drm:drm_init],
[ 15.172806] [drm:drm_get_dev],
[ 15.172965] [drm:drm_get_minor],
[ 15.178244] [drm:drm_get_minor], new minor assigned 0
[ 15.178508] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
[ 15.758948] [drm:drm_stub_open],
[ 15.758967] [drm:drm_open_helper], pid = 235, minor = 0
[ 15.758989] [drm:drm_setup],
[ 15.759017] [drm:drm_ioctl], pid=235, cmd=0xc0246400, nr=0x00, dev 0xe200,
auth=1
[ 15.759040] [drm:drm_ioctl], pid=235, cmd=0xc0246400, nr=0x00, dev 0xe200,
auth=1
[ 15.759067] [drm:drm_release], open_count = 1
[ 15.759077] [drm:drm_release], pid = 235, device = 0xe200, open_count = 1
[ 15.759095] [drm:drm_lastclose],
[ 15.759105] [drm:drm_lastclose], driver lastclose completed
[ 15.759118] [drm:drm_lastclose], lastclose completed
$ lsmod |grep drm
drm 162409 1 via
agpgart 31724 2 via_agp,drm
- I've added the following lines to xorg.conf:
Section "DRI"
Mode 0666
EndSection
- Nothing else added to xorg.conf. Default is to load glx, dri, dri2 (as shown
in the log)
- I'm using openchrome xorg driver which should support the CLE266
chipset, but in /var/log/Xorg.0.log there's no [dri] line. Version for
the module is:
(II) Module openchrome: vendor="http://openchrome.org/";
compiled for 1.7.5, module version = 0.2.904
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
- no useful warning/error in Xorg.0.log:
$ grep -e WW -e EE /var/log/Xorg.0.log
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(II) Loading extension MIT-SCREEN-SAVER
(WW) CHROME(0): Manufacturer plainly copied main PCI IDs to subsystem/card IDs.
(WW) CHROME(0): [XvMC] Cannot use XvMC without DRI!
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
(II) XKB: reuse xkmfile
/var/lib/xkb/server-3781FECB9CB8D26EE03343DB2C93394EA704B98F.xkm
- I'm attaching Xorg.0.log to this email. I hope this can be useful to
you: I'm not really a xorg expert.
Thanks
--
Andrea Carpani <[email protected]>
Xorg.0.log.gz
Description: GNU Zip compressed data
_______________________________________________ openchrome-users mailing list [email protected] http://wiki.openchrome.org/mailman/listinfo/openchrome-users Main page: http://www.openchrome.org Wiki: http://wiki.openchrome.org User Forum: http://wiki.openchrome.org/tikiwiki/tiki-view_forum.php?forumId=1
