El Lunes 13 Septiembre 2010, Andrea Carpani escribió: > Hi everybody, > > I'm trying to enable 3d accel on my via epia m10000 but I have no luck. > The distro is a 10.04 mythbuntu. You clone the installation from an nvidia box, configure your GL/GLX libraries to use mesa instead of nvidia.
on gentoo for example is so easy: eselect opengl set xorg-x11 hope you got a clue. > The M1000 has a CLE266 chipset which should be well supported by > openchrome. > > Here are the things I've done up till now: > > - drm module is loaded at kernel startup. Here's what I get at boot: > $ dmesg |grep -e drm -e agp > [ 0.000000] Linux version 2.6.32-24-generic (bui...@palmer) (gcc version > 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC > 2010 (Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5) [ 0.000000] Kernel > command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic > root=UUID=a2ee4f9b-1db7-414c-9678-920310fd56c2 ro > crashkernel=384M-2G:64M,2G-:128M quiet splash drm.debug=1 log_buf_len=16M > [ 12.326378] Linux agpgart interface v0.103 > [ 13.969611] [drm] Initialized drm 1.1.0 20060810 > [ 14.003008] agpgart: Detected VIA CLE266 chipset > [ 14.020903] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 > [ 15.172767] [drm:drm_init], > [ 15.172806] [drm:drm_get_dev], > [ 15.172965] [drm:drm_get_minor], > [ 15.178244] [drm:drm_get_minor], new minor assigned 0 > [ 15.178508] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on > minor 0 [ 15.758948] [drm:drm_stub_open], > [ 15.758967] [drm:drm_open_helper], pid = 235, minor = 0 > [ 15.758989] [drm:drm_setup], > [ 15.759017] [drm:drm_ioctl], pid=235, cmd=0xc0246400, nr=0x00, dev > 0xe200, auth=1 [ 15.759040] [drm:drm_ioctl], pid=235, cmd=0xc0246400, > nr=0x00, dev 0xe200, auth=1 [ 15.759067] [drm:drm_release], open_count = > 1 > [ 15.759077] [drm:drm_release], pid = 235, device = 0xe200, open_count = > 1 [ 15.759095] [drm:drm_lastclose], > [ 15.759105] [drm:drm_lastclose], driver lastclose completed > [ 15.759118] [drm:drm_lastclose], lastclose completed > > $ lsmod |grep drm > drm 162409 1 via > agpgart 31724 2 via_agp,drm > > > - I've added the following lines to xorg.conf: > Section "DRI" > Mode 0666 > EndSection > > - Nothing else added to xorg.conf. Default is to load glx, dri, dri2 (as > shown in the log) > > - I'm using openchrome xorg driver which should support the CLE266 > chipset, but in /var/log/Xorg.0.log there's no [dri] line. Version for > the module is: > > (II) Module openchrome: vendor="http://openchrome.org/"; > compiled for 1.7.5, module version = 0.2.904 > Module class: X.Org Video Driver > ABI class: X.Org Video Driver, version 6.0 > > > - no useful warning/error in Xorg.0.log: > > $ grep -e WW -e EE /var/log/Xorg.0.log > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. > (II) Loading extension MIT-SCREEN-SAVER > (WW) CHROME(0): Manufacturer plainly copied main PCI IDs to subsystem/card > IDs. (WW) CHROME(0): [XvMC] Cannot use XvMC without DRI! > (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not > found) (II) XKB: reuse xkmfile > /var/lib/xkb/server-3781FECB9CB8D26EE03343DB2C93394EA704B98F.xkm > > > - I'm attaching Xorg.0.log to this email. I hope this can be useful to > you: I'm not really a xorg expert. > > Thanks -- Gustavo Guillermo Perez http://www.compunauta.com http://www.compunauta.net http://anuncios.compunauta.com _______________________________________________ openchrome-users mailing list [email protected] http://wiki.openchrome.org/mailman/listinfo/openchrome-users Main page: http://www.openchrome.org Wiki: http://wiki.openchrome.org User Forum: http://wiki.openchrome.org/tikiwiki/tiki-view_forum.php?forumId=1
