BackwardChainer sometimes intermittenlty fails, maybe 1 out of 10 times. Rn
it again, I bet it will pass.
These pass for me:
4 - ShellUTest (Failed)
6 - AnaphoraTest (Failed)
7 - SuRealUTest (Failed)
8 - MicroplanningUTest (Failed)
Someone should look into them, and see why they fail. The other failures
are "normal".
The README in the tests/cython directory expains how to run the cython
tests by hand (i.e. anaphora) My guess is the fail is some incompelete
python config
--linas
On Tue, Jul 11, 2017 at 10:12 AM, Joseph Horner <[email protected]> wrote:
> Actually I failed to mention I did receive a few errors during the
> "Cloning and building Atomspace" and "Cloning and building OpenCog" --
> looks like some unit tests
> were failing which also showed as errors when I restarted my machine this
> morning. Not sure how detrimental this is but wanted to share for
> completeness.
>
> echo ************************************************************
> *********************
> echo ****************** "Cloning and building Atomspace..."
> ***********************
> echo ************************************************************
> *********************
>
> The following tests FAILED:
> 98 - BackwardChainerUTest (Failed)
> Errors while running CTest
> CMakeFiles/test.dir/build.make:57: recipe for target 'CMakeFiles/test'
> failed
> make[3]: *** [CMakeFiles/test] Error 8
> CMakeFiles/Makefile2:99: recipe for target 'CMakeFiles/test.dir/all' failed
> make[2]: *** [CMakeFiles/test.dir/all] Error 2
> CMakeFiles/Makefile2:106: recipe for target 'CMakeFiles/test.dir/rule'
> failed
> make[1]: *** [CMakeFiles/test.dir/rule] Error 2
> Makefile:197: recipe for target 'test' failed
> make: *** [test] Error 2
>
>
> echo ************************************************************
> **********************
> echo ***************** "Cloning and building OpenCog..."
> *****************************
> echo ************************************************************
> **********************
>
>
> Total Test time (real) = 26.03 sec
>
> The following tests FAILED:
> 2 - AtomSpacePublisherModuleUTest (OTHER_FAULT)
> 4 - ShellUTest (Failed)
> 6 - AnaphoraTest (Failed)
> 7 - SuRealUTest (Failed)
> 8 - MicroplanningUTest (Failed)
> 9 - ChatlangUTest (Failed)
> 10 - MOSESPLNSynergyUTest (Failed)
> 11 - PLNRulesUTest (Failed)
> 22 - PatternMinerUTest (SEGFAULT)
> Errors while running CTest
> CMakeFiles/test.dir/build.make:57: recipe for target 'CMakeFiles/test'
> failed
> make[3]: *** [CMakeFiles/test] Error 8
> CMakeFiles/Makefile2:99: recipe for target 'CMakeFiles/test.dir/all' failed
> make[2]: *** [CMakeFiles/test.dir/all] Error 2
> CMakeFiles/Makefile2:106: recipe for target 'CMakeFiles/test.dir/rule'
> failed
> make[1]: *** [CMakeFiles/test.dir/rule] Error 2
> Makefile:197: recipe for target 'test' failed
> make: *** [test] Error 2
>
> On Sunday, July 9, 2017 at 10:10:39 AM UTC-4, Joseph Horner wrote:
>>
>> This worked great for me. I got everything built and was able to start
>> the cogserver .. thank you
>
> --
> You received this message because you are subscribed to the Google Groups
> "opencog" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at https://groups.google.com/group/opencog.
> To view this discussion on the web visit https://groups.google.com/d/
> msgid/opencog/5c74a74a-8b86-43df-a657-c77f85e29153%40googlegroups.com
> <https://groups.google.com/d/msgid/opencog/5c74a74a-8b86-43df-a657-c77f85e29153%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
> For more options, visit https://groups.google.com/d/optout.
>
--
You received this message because you are subscribed to the Google Groups
"opencog" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/opencog.
To view this discussion on the web visit
https://groups.google.com/d/msgid/opencog/CAHrUA36rda_Kd9%2B-Cx%2BUYi9%3DVk2uJkmgtAj7nU7X2rG4KuZ-5Q%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
