Rubbersheet distorts in z by the data value. I think you can take samples/programs/Topo.net (which applies Colorado elevation data to a tiff of Colorado from a satellite) and go from there.
Pete Hussein Nassar wrote: > Hello > > I attempting to visualize the delays between the components of a digital > circuits by representing the delay as a third dimension, i.e. the delay on a > particular connection would be represented by the vertical thickness of that > wire. I saved a schematic of the circuit under TIFF format and I was able to > import it into DX successfully. Now the trick is being able to place that > second layer which shows the delays on the circuit. In other words is it > possible to assign certain numerical values (in this case the delay) to > certain regions of the image that can be then visualized into that second > layer. > > Does anybody know how I can go about attempting that? > > Thank you very much in advance > > Karim > > ______________________________________________ > FREE Personalized Email at Mail.com > Sign up at http://www.mail.com/?sr=signup
