> > I am new to OpenDX and to x-servers. I have just installed > Exceed, Exceed 3D and OpenDX onto a Dell 933Mhz Pentium III > running Windows 2000 and I am having a few problems. When I > run Editor.bat it takes about 45 seconds for OpenDx to appear > on the screen and when it does the DOS window contains many > warning messages. The following are typical: > > XtWarning: ... found while parsing ':<Key>osfCancel: > PrimitiveParentCancel > XtWarning: translation table syntax error: Unknown keysym > name: osfBeginLine > XtWarning: ... found while parsing ':<Key>osfBeginLine: > PrimitiveTraverseHome > XtWarning: translation table syntax error: Unknown keysym name: osfUp > XtWarning: ... found while parsing ':<Key>osfUp: > PrimitiveTravseUp()' > XtWarning: translation table syntax error: Unknown keysym > name: osfDown > XtWarning: ... found while parsing ':<Key>osfDown: > PrimitiveTravseDown()' >
This problem is due to Hummingbird folks providing the X11 files in Windows format, i.e. \r\n issue, if you are familiar with it. If you do a search on KnowledgeBase at http://www.hummingbird.com they mention a work around for it. The workaround is basically editing Windows Registry files to point to XKeysymDB and XErrorDB files for Exceed. Your keyboard mapping problems are because XkeysymDB file is not read properly. > When I load a sample program (e.g., Zipcodes.net) it loads > immediately. When I click on Execute on Change" it takes > about 30 seconds for an image to appear. Once the image > appears, and I switch to hardware rendering, I can rotate the > image in "real time." > > The keyboard is not mapped properly. The delete key is > mapped to space and the backspace mapped to plus/minus. > Finally, simple commands often take a long time to execute. > For example, when I click on "Quit" it takes more than a > minute before "Do you want to save the program?" appears. > The Exceed issue. Check Exceed Manual. From XConfig tools you can swap the keyboard mapping. > > I went through the following steps to install the software > and to run OpenDX > > 1. Installed Exceed 7.0.0.1 and Exceed 3D into C:\Exceed > 2. Unpacked OpenDX version 4.1.1 into c:\OpenDX > 3. Created directory C:\exceed\user (Exceed 7 didn't create one) > 4. Copied the files and folders in > c:\OpenDX\bin\Exceed\user to C:\exceed\user > 5. Created a directory c:\tmp > 6. Restarted my computer > 7. Started Exceed > 8. Opened a DOS window > 9. Changed the directory to C:\OpendDX\bin > 10. Typed menu > > What is the cause of the warning messages, the delays and > keyboard problem? X config files being in DOS format. >How do I fix them? Please check Support at http://www.Hummingbird.com or e-mail to [EMAIL PROTECTED] for a solution. >I suspect that some of > the problems are associated with the files I copied into > C:\exceed\user as some of the messages seem to be related to > the xKeysymDb file. If I remove all of the files from > C:\exceed\user no additional problems are introduced. Those files were for Exceed 6.x. Exceed 7 is very different then Exceed 6.x, at least terms of where it keeps configuration files and registry entries. Suhaib > >
