Disclaimer: The following implies no criticism of OpenDX, I am probably doing something stupid.
I am having trouble visualising irregular data connected by tetrahedra. While a couple of very simple cases work, with 1 and 6 tetrahedra, I am unsuccessful with my real dataset. I generate about 4500 tetrahedra from about 2500 data points. The program appears to be doing some computation, and gives no errors, but the image is not visible. I am using: Import > Mark > MapToPlane > AutoColor > Image I have turned up the intensity in AutoColor to 10, and I have tried looking at the three planes through the c.g. The same program works fine for my simple cases. The coordinates of my points are in the following range: x in (299000 -> 302000) y in (700000 -> 704000) z in (-15 -> 3) Is it possible that I am violating some program limits? Alternatively, it is possible that an image is being created but I can't see it, i.e. it is off screen. Is there a way to make sure that the the image is in the field of view? Thanks for your help Gib NOTICE - This e-mail is only intended to be read by the named recipient. It may contain information which is confidential, proprietary or the subject of legal privilege. If you are not the intended recipient please notify the sender immediately and delete this e-mail. You may not use any information contained in it. Legal privilege is not waived because you have read this e-mail. For further information on the Beca Group of Companies, visit our web page http://www.beca.co.nz
