At 1:46 PM -0500 3/12/02, Randall Hopper wrote:
Preferring an automatic method, I tried Image(recordEnable=1,
recordFormat="tiff"), but it results in stale images.
and later ...
No, I don't need interaction. The animation is driven by a Sequencer.
I'm using Image because (IIRC) Render currently doesn't support hardware
rendering.
I have run into this problem also, although the thought that it might
be due to the hardware rendering of the image did not occur to me. I
though it was due to the way I had my net structured, more along the
lines of a timing issue.
Anyway the workaround I found was to set the "throttle" parameter on
the Image module to some non-zero value. I am currently using 15, but
I arrived at this value by experimentation. The net runs a little
slower now, but the images are now correctly written to disk.
Someone must have a better way to accomplish achieve the same result,
but this has worked for me in a similar situation to yours.
Norm
*********************************
Norman W. Schaeffler, Ph.D.
Flow Physics and Control Branch
NASA Langley Research Center
Mail Stop 170, Building 1247A, Room 107
Hampton, Virginia 23681
E-Mail: [EMAIL PROTECTED]
Phone: (757) 864-5390
