From: Peter Marko <[email protected]> libpcre is obsolete project replaced by libpcre2. It was not updated for last 5 years. There is no consumer of this recipe in oe-core anymore.
It will be moved to meta-openembedded until all consumers migrate to libpcre2 there, too. Signed-off-by: Peter Marko <[email protected]> --- meta/conf/distro/include/maintainers.inc | 1 - .../distro/include/ptest-packagelists.inc | 1 - meta/recipes-support/libpcre/libpcre/Makefile | 183 ------------------ .../recipes-support/libpcre/libpcre/run-ptest | 3 - meta/recipes-support/libpcre/libpcre_8.45.bb | 74 ------- 5 files changed, 262 deletions(-) delete mode 100644 meta/recipes-support/libpcre/libpcre/Makefile delete mode 100644 meta/recipes-support/libpcre/libpcre/run-ptest delete mode 100644 meta/recipes-support/libpcre/libpcre_8.45.bb diff --git a/meta/conf/distro/include/maintainers.inc b/meta/conf/distro/include/maintainers.inc index 86048e791c..aea2b9f1bc 100644 --- a/meta/conf/distro/include/maintainers.inc +++ b/meta/conf/distro/include/maintainers.inc @@ -379,7 +379,6 @@ RECIPE_MAINTAINER:pn-libogg = "Unassigned <[email protected]>" RECIPE_MAINTAINER:pn-libpam = "Unassigned <[email protected]>" RECIPE_MAINTAINER:pn-libpcap = "Unassigned <[email protected]>" RECIPE_MAINTAINER:pn-libpciaccess = "Wang Mingyu <[email protected]>" -RECIPE_MAINTAINER:pn-libpcre = "Yi Zhao <[email protected]>" RECIPE_MAINTAINER:pn-libpcre2 = "Unassigned <[email protected]>" RECIPE_MAINTAINER:pn-libpipeline = "Wang Mingyu <[email protected]>" RECIPE_MAINTAINER:pn-libpng = "Unassigned <[email protected]>" diff --git a/meta/conf/distro/include/ptest-packagelists.inc b/meta/conf/distro/include/ptest-packagelists.inc index f3f42f908a..f0950bcc99 100644 --- a/meta/conf/distro/include/ptest-packagelists.inc +++ b/meta/conf/distro/include/ptest-packagelists.inc @@ -39,7 +39,6 @@ PTESTS_FAST = "\ libksba \ libmd \ libnl \ - libpcre \ libpcre2 \ librsvg \ libsolv \ diff --git a/meta/recipes-support/libpcre/libpcre/Makefile b/meta/recipes-support/libpcre/libpcre/Makefile deleted file mode 100644 index 708d807d08..0000000000 --- a/meta/recipes-support/libpcre/libpcre/Makefile +++ /dev/null @@ -1,183 +0,0 @@ -TESTS = pcre_stringpiece_unittest RunTest RunGrepTest -subdir = . -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__tty_colors_dummy = \ - mgn= red= grn= lgn= blu= brg= std=; \ - am__color_tests=no -am__tty_colors = { \ - $(am__tty_colors_dummy); \ - if test "X$(AM_COLOR_TESTS)" = Xno; then \ - am__color_tests=no; \ - elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ - am__color_tests=yes; \ - elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ - am__color_tests=yes; \ - fi; \ - if test $$am__color_tests = yes; then \ - red='[0;31m'; \ - grn='[0;32m'; \ - lgn='[1;32m'; \ - blu='[1;34m'; \ - mgn='[0;35m'; \ - brg='[1m'; \ - std='[m'; \ - fi; \ -} -am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } -am__sh_e_setup = case $$- in *e*) set +e;; esac -am__common_driver_flags = \ - --color-tests "$$am__color_tests" \ - --enable-hard-errors "$$am__enable_hard_errors" \ - --expect-failure "$$am__expect_failure" -am__check_pre = \ -$(am__sh_e_setup); \ -$(am__vpath_adj_setup) $(am__vpath_adj) \ -$(am__tty_colors); \ -srcdir=$(srcdir); export srcdir; \ -case "$@" in \ - */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ - *) am__odir=.;; \ -esac; \ -test "x$$am__odir" = x"." || test -d "$$am__odir" \ - || $(MKDIR_P) "$$am__odir" || exit $$?; \ -if test -f "./$$f"; then dir=./; \ -elif test -f "$$f"; then dir=; \ -else dir="$(srcdir)/"; fi; \ -tst=$$dir$$f; log='$@'; \ -if test -n '$(DISABLE_HARD_ERRORS)'; then \ - am__enable_hard_errors=no; \ -else \ - am__enable_hard_errors=yes; \ -fi; -am__set_TESTS_bases = \ - bases='$(TEST_LOGS)'; \ - bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ - bases=`echo $$bases` -RECHECK_LOGS = $(TEST_LOGS) -TEST_SUITE_LOG = test-suite.log -TEST_EXTENSIONS = .test -LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver -am__test_logs1 = $(TESTS:=.log) -am__test_logs2 = $(am__test_logs1:.log=.log) -TEST_LOGS = $(am__test_logs2:.test.log=.log) -MKDIR_P = /bin/mkdir -p -PACKAGE_STRING = PCRE 8.36 -SHELL = /bin/sh -srcdir = . -top_srcdir = . -$(TEST_SUITE_LOG): $(TEST_LOGS) - @$(am__set_TESTS_bases); \ - am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ - redo_bases=`for i in $$bases; do \ - am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ - done`; \ - st=0; \ - errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ - for i in $$redo_bases; do \ - test -f $$i.trs && test -r $$i.trs \ - || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ - test -f $$i.log && test -r $$i.log \ - || { echo "$$errmsg $$i.log" >&2; st=1; }; \ - done; \ - test $$st -eq 0 || exit 1; - @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ - ws='[ ]'; \ - results=`for b in $$bases; do echo $$b.trs; done`; \ - test -n "$$results" || results=/dev/null; \ - all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ - pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ - fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ - skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ - xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ - xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ - error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ - if test `expr $$fail + $$xpass + $$error` -eq 0; then \ - success=true; \ - else \ - success=false; \ - fi; \ - br='==================='; br=$$br$$br$$br$$br; \ - result_count () \ - { \ - if test x"$$1" = x"--maybe-color"; then \ - maybe_colorize=yes; \ - elif test x"$$1" = x"--no-color"; then \ - maybe_colorize=no; \ - else \ - echo "$@: invalid 'result_count' usage" >&2; exit 4; \ - fi; \ - shift; \ - desc=$$1 count=$$2; \ - if test $$maybe_colorize = yes && test $$count -gt 0; then \ - color_start=$$3 color_end=$$std; \ - else \ - color_start= color_end=; \ - fi; \ - echo "$${color_start}# $$desc $$count$${color_end}"; \ - }; \ - create_testsuite_report () \ - { \ - result_count $$1 "TOTAL:" $$all "$$brg"; \ - result_count $$1 "PASS: " $$pass "$$grn"; \ - result_count $$1 "SKIP: " $$skip "$$blu"; \ - result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ - result_count $$1 "FAIL: " $$fail "$$red"; \ - result_count $$1 "XPASS:" $$xpass "$$red"; \ - result_count $$1 "ERROR:" $$error "$$mgn"; \ - }; \ - { \ - echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ - $(am__rst_title); \ - create_testsuite_report --no-color; \ - echo; \ - echo ".. contents:: :depth: 2"; \ - echo; \ - for b in $$bases; do echo $$b; done; \ - } >$(TEST_SUITE_LOG).tmp || exit 1; \ - mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ - if $$success; then \ - col="$$grn"; \ - else \ - col="$$red"; \ - test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ - fi; \ - echo "$${col}$$br$${std}"; \ - echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ - echo "$${col}$$br$${std}"; \ - create_testsuite_report --maybe-color; \ - echo "$$col$$br$$std"; \ - if $$success; then :; else \ - echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ - echo "$$col$$br$$std"; \ - fi; \ - $$success || exit 1 -check-TESTS: - @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list - @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) - @set +e; $(am__set_TESTS_bases); \ - log_list=`for i in $$bases; do echo $$i.log; done`; \ - log_list=`echo $$log_list`; \ - $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ - exit $$?; -pcre_stringpiece_unittest.log: pcre_stringpiece_unittest$(EXEEXT) - @p='pcre_stringpiece_unittest$(EXEEXT)'; \ - b='pcre_stringpiece_unittest'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) -- "$$tst" -RunTest.log: RunTest - @p='RunTest'; \ - b='RunTest'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) -- "$$tst" -RunGrepTest.log: RunGrepTest - @p='RunGrepTest'; \ - b='RunGrepTest'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) -- "$$tst" diff --git a/meta/recipes-support/libpcre/libpcre/run-ptest b/meta/recipes-support/libpcre/libpcre/run-ptest deleted file mode 100644 index 990d4a12ad..0000000000 --- a/meta/recipes-support/libpcre/libpcre/run-ptest +++ /dev/null @@ -1,3 +0,0 @@ -#!/bin/sh - -make check-TESTS diff --git a/meta/recipes-support/libpcre/libpcre_8.45.bb b/meta/recipes-support/libpcre/libpcre_8.45.bb deleted file mode 100644 index c5ecbd8cf2..0000000000 --- a/meta/recipes-support/libpcre/libpcre_8.45.bb +++ /dev/null @@ -1,74 +0,0 @@ -DESCRIPTION = "The PCRE library is a set of functions that implement regular \ -expression pattern matching using the same syntax and semantics as Perl 5. PCRE \ -has its own native API, as well as a set of wrapper functions that correspond \ -to the POSIX regular expression API." -SUMMARY = "Perl Compatible Regular Expressions" -HOMEPAGE = "http://www.pcre.org"; -SECTION = "devel" -LICENSE = "BSD-3-Clause" -LIC_FILES_CHKSUM = "file://LICENCE;md5=b5d5d1a69a24ea2718263f1ff85a1c58" -SOURCEFORGE_PROJECT = "pcre" -SRC_URI = "${SOURCEFORGE_MIRROR}/${SOURCEFORGE_PROJECT}/pcre-${PV}.tar.bz2 \ - file://run-ptest \ - file://Makefile \ - " - -SRC_URI[sha256sum] = "4dae6fdcd2bb0bb6c37b5f97c33c2be954da743985369cddac3546e3218bffb8" - -CVE_PRODUCT = "pcre" - -S = "${UNPACKDIR}/pcre-${PV}" - -PROVIDES += "pcre" -DEPENDS += "bzip2 zlib" - -PACKAGECONFIG ??= "pcre8 unicode-properties jit" - -PACKAGECONFIG[pcre8] = "--enable-pcre8,--disable-pcre8" -PACKAGECONFIG[pcre16] = "--enable-pcre16,--disable-pcre16" -PACKAGECONFIG[pcre32] = "--enable-pcre32,--disable-pcre32" -PACKAGECONFIG[pcretest-readline] = "--enable-pcretest-libreadline,--disable-pcretest-libreadline,readline," -PACKAGECONFIG[unicode-properties] = "--enable-unicode-properties,--disable-unicode-properties" -PACKAGECONFIG[jit] = "--enable-jit=auto,--disable-jit" - -BINCONFIG = "${bindir}/pcre-config" - -inherit autotools binconfig-disabled ptest sourceforge-releases - -EXTRA_OECONF = "--enable-utf" - -PACKAGES =+ "libpcrecpp libpcreposix pcregrep pcregrep-doc pcretest pcretest-doc" - -SUMMARY:libpcrecpp = "${SUMMARY} - C++ wrapper functions" -SUMMARY:libpcreposix = "${SUMMARY} - C wrapper functions based on the POSIX regex API" -SUMMARY:pcregrep = "grep utility that uses perl 5 compatible regexes" -SUMMARY:pcregrep-doc = "grep utility that uses perl 5 compatible regexes - docs" -SUMMARY:pcretest = "program for testing Perl-comatible regular expressions" -SUMMARY:pcretest-doc = "program for testing Perl-comatible regular expressions - docs" - -FILES:libpcrecpp = "${libdir}/libpcrecpp.so.*" -FILES:libpcreposix = "${libdir}/libpcreposix.so.*" -FILES:pcregrep = "${bindir}/pcregrep" -FILES:pcregrep-doc = "${mandir}/man1/pcregrep.1" -FILES:pcretest = "${bindir}/pcretest" -FILES:pcretest-doc = "${mandir}/man1/pcretest.1" - -BBCLASSEXTEND = "native nativesdk" - -do_install_ptest() { - t=${D}${PTEST_PATH} - cp ${UNPACKDIR}/Makefile $t - cp -r ${S}/testdata $t - for i in pcre_stringpiece_unittest pcregrep pcretest; do - ${B}/libtool --mode=install install ${B}/$i $t/ - done - for i in RunTest RunGrepTest test-driver; do - install ${S}/$i $t - done - # Skip the fr_FR locale test. If the locale fr_FR is found, it is tested. - # If not found, the test is skipped. The test program assumes fr_FR is non-UTF-8 - # locale so the test fails if fr_FR is UTF-8 locale. - sed -i -e 's:do3=yes:do3=no:g' ${D}${PTEST_PATH}/RunTest -} - -RDEPENDS:${PN}-ptest += "make"
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#238959): https://lists.openembedded.org/g/openembedded-core/message/238959 Mute This Topic: https://lists.openembedded.org/mt/119839709/21656 Group Owner: [email protected] Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
