Hi Martin, > On Sat, Jun 08, 2013 at 11:10:20AM +0200, Martin Jansa wrote:
> > Something is wrong with this one: > > > > ERROR: OE-core's config sanity checker detected a potential > > misconfiguration. > > Either fix the cause of this error or at your own risk disable the > > checker (see sanity.conf). > > Following is the list of potential problems / advisories: > > > > Error, the PACKAGE_ARCHS variable does not contain TUNE_PKGARCH > > (${ARMPKGARCH_tune-cortexa8t-neon}).Toolchain tunings invalid: > > Tuning 'cortexa8t-neon' has no defined features, and cannot be used. > > > > ERROR: Execution of event handler 'check_sanity_eventhandler' failed > > > > Please use tests like > > http://git.openembedded.org/openembedded-core-contrib/log/?h=jansa/tune2-test > > to check that all tunes are still valid after such change. > I was not aware of this test. I'll look into this. > Also it was using -mtune and documentation talks about -mtune, but > actual tune-cortexa.inc is using -mcpu, this change wasn't mentioned in > commit message and I don't think it's improvement. > *facepalm* This is actually my mistake when I squashed my cortex-a5 file into a general cortexa file. I meant to keep the -mtune in place. I started out using mcpu before realizing mtune was also valid for cortex-a5. I have a patch to revert that change / go back to -mtune. I will send it after I rebuild for cortex-a5. Sorry about that. It didn't come out because the build was happy with -mcpu=cortex-a5 -- Andy Voltz Timesys Corporation _______________________________________________ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.openembedded.org/mailman/listinfo/openembedded-core