The iso9660 file system support needs to be added to grub in order to be able to correctly find the grub.cfg. The grub commands to locate the grub.cfg also needs to be encoded into grub's default configuration.
This change allows the resulting grub binary to work both in the hard drive / USB boot case or the optical media boot case. [YOCTO #4100] Signed-off-by: Jason Wessel <[email protected]> --- meta/recipes-bsp/grub/grub-efi-native_2.00.bb | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/meta/recipes-bsp/grub/grub-efi-native_2.00.bb b/meta/recipes-bsp/grub/grub-efi-native_2.00.bb index 2d3d68a..3cff838 100644 --- a/meta/recipes-bsp/grub/grub-efi-native_2.00.bb +++ b/meta/recipes-bsp/grub/grub-efi-native_2.00.bb @@ -66,9 +66,13 @@ EXTRA_OECONF = "--with-platform=efi --disable-grub-mkfont \ --enable-liblzma=no --enable-device-mapper=no --enable-libzfs=no" do_mkimage() { - ./grub-mkimage -p /EFI/BOOT -d ./grub-core/ \ + # Search for the grub.cfg on the local boot media with built in config file + echo 'search.file /EFI/BOOT/grub.cfg root' > cfg + echo 'set prefix=($root)/EFI/BOOT' >> cfg + + ./grub-mkimage -c cfg -p /EFI/BOOT -d ./grub-core/ \ -O ${GRUB_TARGET}-efi -o ./${GRUB_IMAGE} \ - boot linux ext2 fat serial part_msdos part_gpt normal efi_gop + boot linux ext2 fat serial part_msdos part_gpt normal efi_gop iso9660 search } addtask mkimage after do_compile before do_install -- 1.7.9.5 _______________________________________________ Openembedded-core mailing list [email protected] http://lists.openembedded.org/mailman/listinfo/openembedded-core
