Hello, I add ti-meta but capemgr is not work
This my boot log Booting from mmc ... ## Booting kernel from Legacy Image at 80007fc0 ... Image Name: Linux-3.14.0-yocto-standard Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4985304 Bytes = 4.8 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 XIP Kernel Image ... OK OK Using Device Tree in place at 80f80000, end 80f8a207 Starting kernel ... Booting Linux on physical CPU 0x0 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 3.14.0-yocto-standard (panda@pandabook) (gcc version 4.8.2 (GCC) ) #1 PREEMPT Fri Jun 27 15:16:56 EEST 2014 CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: TI AM335x BeagleBone cma: CMA: reserved 16 MiB at 9e800000 Memory policy: Data cache writeback CPU: All CPU(s) started in SVC mode. AM335X ES2.1 (sgx neon ) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792 Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) allocated 1048576 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Memory: 489448K/523264K available (7491K kernel code, 520K rwdata, 2444K rodata, 488K init, 757K bss, 33816K reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc09bc044 (9937 kB) .init : 0xc09bd000 - 0xc0a37034 ( 489 kB) .data : 0xc0a38000 - 0xc0aba0d4 ( 521 kB) .bss : 0xc0aba0d4 - 0xc0b77678 ( 758 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:16 nr_irqs:16 16 IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts Total of 128 interrupts on 1 active controller OMAP clockevent source: timer2 at 24000000 Hz sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns OMAP clocksource: timer1 at 24000000 Hz Console: colour dummy device 80x30 Calibrating delay loop... 548.86 BogoMIPS (lpj=2744320) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Initializing cgroup subsys debug Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Testing write buffer coherency: ok ftrace: allocating 25107 entries in 74 pages Setting up static identity map for 0x806c4000 - 0x806c4058 devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 omap_hwmod: tptc0 using broken dt data from edma omap_hwmod: tptc1 using broken dt data from edma omap_hwmod: tptc2 using broken dt data from edma omap_hwmod: debugss: _wait_target_disable failed xor: measuring software checksum speed arm4regs : 685.200 MB/sec 8regs : 504.800 MB/sec 32regs : 658.800 MB/sec xor: using function: arm4regs (685.200 MB/sec) pinctrl core: initialized pinctrl subsystem regulator-dummy: no parameters NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor ladder cpuidle: using governor menu platform 49000000.edma: alias fck already exists platform 49000000.edma: alias fck already exists platform 49000000.edma: alias fck already exists OMAP GPIO hardware version 0.1 hw-breakpoint: debug architecture 0x4 unsupported. bio: create slab <bio-0> at 0 raid6: int32x1 89 MB/s raid6: int32x2 107 MB/s raid6: int32x4 90 MB/s raid6: int32x8 92 MB/s raid6: using algorithm int32x2 (107 MB/s) raid6: using intx1 recovery algorithm edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver vmmcsd_fixed: 3300 mV SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe platform 44e0b000.i2c: Driver omap_i2c requests probe deferral cfg80211: Calling CRDA to update world regulatory domain Switched to clocksource timer1 NET: Registered protocol family 2 TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available futex hash table entries: 256 (order: -1, 3072 bytes) NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered msgmni has been set to 987 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 omap_uart 44e09000.serial: no wakeirq for uart0 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 console [ttyO0] enabled [drm] Initialized drm 1.1.0 20060810 brd: module loaded mtdoops: mtd device (mtddev=name/number) must be supplied usbcore: registered new interface driver kaweth pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new interface driver pegasus usbcore: registered new interface driver rtl8150 usbcore: registered new interface driver asix usbcore: registered new interface driver ax88179_178a usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver dm9601 usbcore: registered new interface driver smsc75xx usbcore: registered new interface driver smsc95xx usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus usbcore: registered new interface driver MOSCHIP usb-ethernet driver usbcore: registered new interface driver int51x1 usbcore: registered new interface driver cdc_ncm ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-omap: OMAP-EHCI Host Controller driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 i2c /dev entries driver omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec 48060000.mmc supply vmmc_aux not found, using dummy regulator 481d8000.mmc supply vmmc_aux not found, using dummy regulator usbcore: registered new interface driver usbhid usbhid: USB HID core driver oprofile: using arm/armv7 u32 classifier Actions configured TCP: cubic registered NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 mmc0: host does not support reading read-only switch. assuming write-enable. Key type dns_resolver registered ThumbEE CPU extension supported. mmc0: new high speed SDHC card at address 0001 bio: create slab <bio-1> at 1 mmcblk0: mmc0:0001 ASTC 7.38 GiB mmcblk0: p1 p2 Btrfs loaded regulator-dummy: disabling slave hdmi.6: could not get i2c platform hdmi.6: Driver slave requests probe deferral platform 4830e000.lcdc: Driver tilcdc requests probe deferral DCDC1: at 1500 mV vdd_mpu: 925 <--> 1325 mV at 1100 mV vdd_core: 925 <--> 1150 mV at 1100 mV LDO1: at 1800 mV LDO2: at 3300 mV LDO3: 1800 mV LDO4: at 3300 mV tps65217 0-0024: TPS65217 ID 0xe version 1.2 omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz mmc1: BKOPS_EN bit is not set mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 MMC02G 1.78 GiB mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB mmcblk1: p1 p2 mmcblk1boot1: unknown partition table mmcblk1boot0: unknown partition table tilcdc 4830e000.lcdc: found TDA19988 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. tilcdc 4830e000.lcdc: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 Console: switching to colour frame buffer device 128x48 tilcdc 4830e000.lcdc: fb0: frame buffer device tilcdc 4830e000.lcdc: registered panic notifier [drm] Initialized tilcdc 1.0.0 20121205 on minor 0 console [netcon0] enabled netconsole: network logging started davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 davinci_mdio 4a101000.mdio: detected phy mask fffffffe libphy: 4a101000.mdio: probed davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 Detected MACID = 1c:ba:8c:f1:ec:e4 omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 179:2. devtmpfs: mounted Freeing unused kernel memory: 488K (c09bd000 - c0a37000) INIT: version 2.88 booting Starting udev udevd[82]: starting version 182 EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Starting Bootlog daemon: bootlogd. random: dd urandom read with 128 bits of entropy available random: nonblocking pool is initialized Mon Jun 30 07:45:00 UTC 2014 INIT: Entering runlevel: 5 Configuring network interfaces... net eth0: initializing cpsw version 1.12 (0) net eth0: phy found : id is : 0x7c0f1 libphy: PHY 4a101000.mdio:01 not found net eth0: phy 4a101000.mdio:01 not found on slave 1 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.22.1) started Sending discover... libphy: 4a101000.mdio:00 - Link is Up - 100/Full IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending discover... Sending select for 192.168.50.1 Lease of 192.168.50.18 obtained, lease time 691200 /etc/udhcpc.d/50default: Adding DNS 192.168.50.1 /etc/udhcpc.d/50default: Adding DNS 192.168.50.1 done. Starting OpenBSD Secure Shell server: sshd done. Starting syslogd/klogd: done Stopping Bootlog daemon: bootlogd. Poky (Yocto Project Reference Distro) 1.6.1 beaglebone /dev/ttyO0 I run this command root@beaglebone:~# cape-stop.sh hexdump: /sys/bus/i2c/devices/3-005*/eeprom: No such file or directory unknown cape: 2014-06-30 11:15 GMT+03:00 Anders Darander <and...@chargestorm.se>: > * Robert Yang <liezhi.y...@windriver.com> [140630 05:47]: > > > > On 06/30/2014 12:24 AM, Life Life wrote: > > > Hello, > > > > I'm trying build yocto based linux, My hardware is beaglebone black I > > > successfull build system image. But I can't see capemanager. Beacuse > my lcd is > > > not work. > > > Hello, > > > The cape manager is in meta-ti layer: > > > http://layers.openembedded.org/layerindex/branch/master/layer/meta-ti/ > > > Seems that we'd better add it to meta-yoco-bsp ? > > Unless something has changed since I last looked at this, I don't think > so. > > If I remember correctly, capemgr basically consists of a number of > patches not in the mainline kernel (and also not in TI's staging > kernel). I haven't checked it, by I doubt that we have them in the > linux-yocto kernel. (Especially as the last time I checked it, you had > to revert to a 3.8 (if I rember correctly, it might have been an even > earlier kernel) kernel to get full capemgr support. > > If this has changed, then it'd be interesting to know! > > Cheers, > Anders > > > Add Saul in the loop. > > > -- > Anders Darander > ChargeStorm AB / eStorm AB > -- > _______________________________________________ > Openembedded-core mailing list > Openembedded-core@lists.openembedded.org > http://lists.openembedded.org/mailman/listinfo/openembedded-core >
-- _______________________________________________ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.openembedded.org/mailman/listinfo/openembedded-core