Hi Marco, Marco Cavallini schrieb: > I have been trying to run a minimal-image on an ARM system, because I > plan to use it on a 16MB NOR Flash. > > I started wirh a PXA270 based board but I faced to puzzling jffs2 > errors, then I tried on a more reliable machine (for me) Ronetix-pm9263 > with same results. > > Does anybody tested minimal-image recently? > Did it work? > With which machine? > > Any hint will be greatly appreciated.
this looks like either the jffs2 image are completely messed up (not very likely) or something went wrong while flashing. Do the bootloader agree with the kernels about the partition layout and was the root flash partition erased completely? I do not have a Ronetix board around which would be useful to verify but I could try it with the SimOne I have - I built a minimal image for it recently but didn't test it so far. Greetings Florian -- The dream of yesterday Florian Boor is the hope of today Tel: +49 271-771091-15 and the reality of tomorrow. Fax: +49 271-771091-19 [Robert Hutchings Goddard, 1904] [email protected] http://www.kernelconcepts.de/en _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
