Florian Boor ha scritto, Il 02/09/2010 18:20: > Hi Marco, > > Marco Cavallini schrieb: >> I have been trying to run a minimal-image on an ARM system, because I >> plan to use it on a 16MB NOR Flash. >> >> I started wirh a PXA270 based board but I faced to puzzling jffs2 >> errors, then I tried on a more reliable machine (for me) Ronetix-pm9263 >> with same results. >> >> Does anybody tested minimal-image recently? >> Did it work? >> With which machine? >> >> Any hint will be greatly appreciated. > > this looks like either the jffs2 image are completely messed up (not very > likely) or something went wrong while flashing. Do the bootloader agree with > the > kernels about the partition layout and was the root flash partition erased > completely? > > I do not have a Ronetix board around which would be useful to verify but I > could > try it with the SimOne I have - I built a minimal image for it recently but > didn't test it so far.
Dear Florian, a complete root flash partition clean solved the problem Thank you /marco _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
