On Thu, Oct 7, 2010 at 3:54 PM, Gary Thomas <[email protected]> wrote: > On 10/07/2010 03:11 PM, Elvis Dowson wrote: >> >> Hi, >> Would someone be able to help me with modifying an >> omap3-console-image recipe, such that in the final image, the >> /etc/network/interfaces file gets edited as follows >> >> #auto eth0 <- remove # sign ( auto eth0 ) >> #iface eth0 inet dhcp <- remove # sign ( iface eth0 inet dhcp ) >> #iface eth1 inet dhcp >> >> I am using a Gumstix Overo + Chestnut43 expansion board, which has an >> inbuilt wired ethernet interface. I have to make this modification manually, >> to enable this interface each time. However, if I can modify the OE recipe >> somehow to do this it would be great. I know it can be done, but I don't >> know where to start and which file to modify. > > Add the file the way you like it to > .../openembedded/recipes/netbase/netbase/overo > and rebuild netbase. Use the beagleboard as an example.
or use bblayers and bbappend. > > -- > ------------------------------------------------------------ > Gary Thomas | Consulting for the > MLB Associates | Embedded world > ------------------------------------------------------------ > > _______________________________________________ > Openembedded-devel mailing list > [email protected] > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel > _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
