2010/10/8 Khem Raj <[email protected]>: > On Thu, Oct 7, 2010 at 3:54 PM, Gary Thomas <[email protected]> wrote: >> On 10/07/2010 03:11 PM, Elvis Dowson wrote: >>> >>> Hi, >>> Would someone be able to help me with modifying an >>> omap3-console-image recipe, such that in the final image, the >>> /etc/network/interfaces file gets edited as follows >>> >>> #auto eth0 <- remove # sign ( auto eth0 ) >>> #iface eth0 inet dhcp <- remove # sign ( iface eth0 inet dhcp ) >>> #iface eth1 inet dhcp >>> >>> I am using a Gumstix Overo + Chestnut43 expansion board, which has an >>> inbuilt wired ethernet interface. I have to make this modification manually, >>> to enable this interface each time. However, if I can modify the OE recipe >>> somehow to do this it would be great. I know it can be done, but I don't >>> know where to start and which file to modify. >> >> Add the file the way you like it to >> .../openembedded/recipes/netbase/netbase/overo >> and rebuild netbase. Use the beagleboard as an example. > > or use bblayers and bbappend.
Actually if you use an overlay you can just put your patch file in the files dir of your overlay. If I recall correctly files will be first fetched in the FILESPATHPKG in the overlay before looking in the oe dir (assuming your layer priorities are ok) Have fun! Frans _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
