-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 30-12-10 20:09, Eric Bénard wrote: > Hi Koen, > > same problems exists with ti-dmai (which also shows another one as a > bonus ;-) > > oe master + angstrom-2010.x + beagleboard leads to : > > .../... /usr/include -Dxdc_target_name__=arm/GCArmv5T -g -Wall -Werror > -c -o obj/linux/Capture.omap3530.o470MV linux/Capture.c > cc1: warnings being treated as errors > In file included from > /home/ebenard/OMAP/2010/angstrom-setup-scripts/build/tmp-angstrom_2010_x/sysroots/beagleboard-angstrom-linux-gnueabi/kernel/include/linux/videodev2.h:66:0, > > from linux/Capture.c:43: > /home/ebenard/OMAP/2010/angstrom-setup-scripts/build/tmp-angstrom_2010_x/sysroots/beagleboard-angstrom-linux-gnueabi/kernel/include/linux/types.h:13:2: > error: #warning "Attempt to use kernel headers from user space, see > http://kernelnewbies.org/KernelHeaders"; > make[1]: *** [obj/linux/Capture.omap3530.o470MV] Error 1 > > this can be "fixed" by removing -Werror in the makefile but then I meet > the same problem as with ti-c6accel : > > Linking linux/audio_decode1_omap3530.x470MV from appMain.omap3530.o470MV > linux/main.omap3530.o470MV linux/audio_decode1_omap3530_config/linker.cmd.. > /home/ebenard/OMAP/2010/angstrom-setup-scripts/build/tmp-angstrom_2010_x/sysroots/i686-linux/usr/armv7a/bin/arm-angstrom-linux-gnueabi-gcc > -lpthread -lm > -L/home/ebenard/OMAP/2010/angstrom-setup-scripts/build/tmp-angstrom_2010_x/sysroots/armv7a-angstrom-linux-gnueabi/usr/lib > -lasound -Wl,-Map,linux/audio_decode1_omap3530.x470MV.map -o > linux/audio_decode1_omap3530.x470MV appMain.omap3530.o470MV > linux/main.omap3530.o470MV linux/audio_decode1_omap3530_config/linker.cmd > /home/ebenard/OMAP/2010/angstrom-setup-scripts/build/tmp-angstrom_2010_x/sysroots/i686-linux/usr/armv7a/lib/gcc/arm-angstrom-linux-gnueabi/4.5.3/../../../../arm-angstrom-linux-gnueabi/bin/ld: > warning: linux/audio_decode1_omap3530_config/linker.cmd contains output > sections; did you forget -T? > /home/ebenard/OMAP/2010/angstrom-setup-scripts/build/tmp-angstrom_2010_x/sysroots/i686-linux/usr/armv7a/lib/gcc/arm-angstrom-linux-gnueabi/4.5.3/../../../../arm-angstrom-linux-gnueabi/bin/ld: > .gnu.attributes not found for insert > collect2: ld returned 1 exit status
If you build the new xdctools with the linker hack ( http://cgit.openembedded.org/cgit.cgi/openembedded/commit/?id=7993e4ca7746a4ca9e7116cc76e6c1da32a76690 ) then you only need a few changes to make it all build: 1) edit conf/distro/include/angstrom-codec-engine-latest-preferred-versions.inc: - -PREFERRED_VERSION_ti-linuxutils = "2_25_05_11" +PREFERRED_VERSION_ti-linuxutils = "2_26_01_02" - -PREFERRED_VERSION_ti-xdctools = "3_20_05_76" +PREFERRED_VERSION_ti-xdctools = "3_20_06_81" 2) Add -fPIC to C_FLAGS in the c6accel soc/ Makefiles (plural) 3) remove -Werror from DMAI makefiles 4) remove -Werror from gstreamer-ti makefiles That will get you a succesfull build, but you will have some runtime problems. My current goal is to get c6accel working on my USRP E100 so gnuradio can use that, so gst-ti is out of scope for that. regards, Koen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (Darwin) iD8DBQFNHOseMkyGM64RGpERAvFLAKCRUN2pJozNFVUR5Z/dR4vcut6sqQCfTXFR W+ztBNtzo3I2C70qMexOVV8= =U6CK -----END PGP SIGNATURE----- _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
