On 30/12/2010 21:27, Koen Kooi wrote:
If you build the new xdctools with the linker hack (
http://cgit.openembedded.org/cgit.cgi/openembedded/commit/?id=7993e4ca7746a4ca9e7116cc76e6c1da32a76690
) then you only need a few changes to make it all build:
1) edit
conf/distro/include/angstrom-codec-engine-latest-preferred-versions.inc:
- -PREFERRED_VERSION_ti-linuxutils = "2_25_05_11"
+PREFERRED_VERSION_ti-linuxutils = "2_26_01_02"
- -PREFERRED_VERSION_ti-xdctools = "3_20_05_76"
+PREFERRED_VERSION_ti-xdctools = "3_20_06_81"
2) Add -fPIC to C_FLAGS in the c6accel soc/ Makefiles (plural)
3) remove -Werror from DMAI makefiles
4) remove -Werror from gstreamer-ti makefiles
That will get you a succesfull build, but you will have some runtime
problems. My current goal is to get c6accel working on my USRP E100 so
gnuradio can use that, so gst-ti is out of scope for that.
thanks, I'll try that.
In order to finish the image build, I removed gstreamer-ti from
beagleboard-linuxtag2010-demo-image which also "fixed" the problem as I don't
need gst-ti for my tests ;-)
Eric
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
