On Fri, Apr 27, 2012 at 5:38 AM, Martin Ertsås <[email protected]> wrote: > Hi. > > I'm working on a pandaboard with OMAP4460. Were trying to use the newest > PVR drivers, which conforms to the result that arose from > https://wiki.linaro.org/OfficeofCTO/HardFloat/LinkerPathCallApr2012 > > We have applied the patch at the bottom of that page gcc, and also a > patch for making eglibc make ld-linux-armhf, and load ld-linux-armhf > instead of ld-linux. Problem is, this gives us a kernel panic when it > tries to run init. Linking ld-linux.so.3 to ld-linux-armhf.so.3 does not > work, and we're kind of in the dark as to what is missing. > > We tried fixing this by renaming the toolchain to be > arm-none-linux-gnueabihf instead of arm-none-linux-gnueabi, as we heard > this might be a problem with hardfloats, but this needed a lot of extra > patches, and some patchwork on other packages like openssl and shadow. > > My question is, are there any ongoing plans to fix this, and make sure > that if we have set hard float we make ld-linux-armhf in openembedded? > > For the record we are using eglibc2.15 and gcc4.6 from openembedded-core.
would you show the patches so I can take a look what you did and whats going on > > Best regards > Martin Ertsaas > > _______________________________________________ > Openembedded-devel mailing list > [email protected] > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
