Guillaume Spalla wrote:
Hi all,
I am building an image (console-image.bb <http://console-image.bb>) for
an at91sam9263ek board. I am using the angstrom-2008.1 distribution. The
kernel is 2.6.28, the gcc version 4.2.4, and my partition is in JFFS2.
When I boot the board, everything looks ok until this line:
[42949375.840000] Warning: unable to open an initial console.
It usually means that ur kernel can't find a /dev/console. Be sure you
have one in ur rootfs image.
Chris
Then the system does not boot anymore. There is no kernel panic
messages. If I reboot the board, then the system is working fine.
But if I use the same root file system in a read only format (cramfs /
squashfs), then the system freezes at the same point and it never boots
(even if I reboot several times).
Did anyone already encountered this problem?
Thanks in advance,
Best regards,
Guillaume Spalla
------------------------------------------------------------------------
_______________________________________________
Openembedded-users mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
_______________________________________________
Openembedded-users mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
