Sorry for my late answer, that was indeed the problem, thanks ! Guillaume
On Sat, Feb 21, 2009 at 10:09 PM, Christian Gagneraud < [email protected]> wrote: > Guillaume Spalla wrote: > >> Hi all, >> >> I am building an image (console-image.bb <http://console-image.bb>) for >> an at91sam9263ek board. I am using the angstrom-2008.1 distribution. The >> kernel is 2.6.28, the gcc version 4.2.4, and my partition is in JFFS2. When >> I boot the board, everything looks ok until this line: >> >> [42949375.840000] Warning: unable to open an initial console. >> > > It usually means that ur kernel can't find a /dev/console. Be sure you have > one in ur rootfs image. > > Chris > > >> Then the system does not boot anymore. There is no kernel panic messages. >> If I reboot the board, then the system is working fine. >> But if I use the same root file system in a read only format (cramfs / >> squashfs), then the system freezes at the same point and it never boots >> (even if I reboot several times). >> >> Did anyone already encountered this problem? >> >> Thanks in advance, >> >> Best regards, >> >> Guillaume Spalla >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Openembedded-users mailing list >> [email protected] >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users >> > > > _______________________________________________ > Openembedded-users mailing list > [email protected] > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users >
_______________________________________________ Openembedded-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
