Garry Harper wrote:
Hi All,
I am new to openfiler and I am trying it out to see if it will work in
my scenario.
I have come across a few snags that I would like some advice on.
Firstly:
I have installed openfiler of a Sun X4500, this box has 24tb
(48x500gbSATA) disks. Under Physical Storage Mgmt openfiler only shows
the first 26 /dev/sda to /dev/sdz is this a known issue or is there
something on my system?
Possibly a bug in the GUI code. cat /proc/partitions to see whether all
48 drives are showing.
I have a qla2340 FC card in the machine connected to my HP EVA san, I
have presented a 1tb lun to the machine. How do I get this to work? I
tried doing a fdisk –l but I cant see the lun at all, how can I tel if
the card drivers have been loaded.
lsmod , dmesg
But you need to update a couple of troves in order to get this to work
with later kernels:
conary update qla-firmware
conary update [EMAIL PROTECTED]:devel
In that order. The either reload the qla2xxx module or reboot.
Let me know whether all 48 (49) disks show up in /proc/partitions and
I'll fix the bug in the GUI code accordingly.
R.
Regards
Garry Harper
------------------------------------------------------------------------
_______________________________________________
Openfiler-users mailing list
[email protected]
https://lists.openfiler.com/mailman/listinfo/openfiler-users
_______________________________________________
Openfiler-users mailing list
[email protected]
https://lists.openfiler.com/mailman/listinfo/openfiler-users
