sunil anand wrote:
Hello Experts,
Any words of wisdom.
Should I move forward with the workaround.
You've misconfigured host access control in the System tab.
The key->value pair should be <identifier>:<ip_address>
Host: camprac1_priv
Network: 192.168.254.11
Netmask: 255.255.255.255
R.
Thanks
--- On Wed, 8/13/08, sunil anand <[EMAIL PROTECTED]> wrote:
From: sunil anand <[EMAIL PROTECTED]>
Subject: Re: [OF-users] Re: iscsiadm does not discover targets
To: [EMAIL PROTECTED], "Andrew Kerber" <[EMAIL PROTECTED]>
Cc: [email protected]
Date: Wednesday, August 13, 2008, 10:34 AM
Hello All,
I appreciate your quick response.
Yes, I can ping openfiler1_priv
Here is the latest update:
I found the following on the web and for some reason it
works:
-----------------------------------------------------------
On Client (RAC nodes)
in node 1
InitiatorAlias=oelrac1
in node 2
InitiatorAlias=oelrac2
On NAS
add comment to iqn urls listed in /etc/initiators.deny
----------------------------------------------------------------------
Now the question is : Is the workaround valid and would not
cause any other issues?
Do we have any permanent solution to this this issue?
I have attached initiators.allow and inintiators.deny
Thanks
Sunil
--- On Wed, 8/13/08, Andrew Kerber
<[EMAIL PROTECTED]> wrote:
From: Andrew Kerber <[EMAIL PROTECTED]>
Subject: Re: [OF-users] Re: iscsiadm does not discover
targets
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED],
[email protected]
Date: Wednesday, August 13, 2008, 10:03 AM
Can you ping openfiler-priv?
On Wed, Aug 13, 2008 at 8:33 AM, Rafiu Fakunle
<[EMAIL PROTECTED]> wrote:
sunil anand wrote:
Hello Rafiu,
I am using one inetranl hard drive
(550gb), I
created a volume group
RAC1. I created logical 5 logical volumes and
mapped those volumes. The
iscsi target service is running on filer box.
I
installed the rpm (Oracle
Linux 5) to install iscsi initiator on all 3
PCs
and started the service on
all 3 PCs
Now when I run iscsiadm command as I
mentioned
before it just return to
the prompt with any errors or any ther
output.
Pls show output of the following:
cat /etc/initiators.allow
cat /etc/initiators.deny
Also:
1) Did you configure CHAP/auth?
2) Have you updated to latest openfiler (conary
updateall) and rebooted?
R.
--- On Wed, 8/13/08, Rafiu Fakunle
<[EMAIL PROTECTED]> wrote:
From: Rafiu Fakunle
<[EMAIL PROTECTED]>
Subject: Re: iscsiadm does not discover
targets
To: [EMAIL PROTECTED]
Cc: [email protected]
Date: Wednesday, August 13, 2008, 8:57 AM
sunil anand wrote:
Hello,
I am using openfiler 2.3 on
Intel
PCs. I
configured targets and trying to discover
from
other PCs.
iscsiadm command does not return anything
I am using :
# iscsiadm -m discovery -t
sendtargets -p
openfiler1_priv
I did try debug option and that
returns
the similar
messages as following with other
messgaes:
can not stat openfiler1_priv, 3260
can not
open openfiler1_priv, 3260
Any ideas/pointers, please let me
know. I
appreciate
your help.
Regards
Sunil
Can you provide information about how you
configured on the
Openfiler server side?
R.
_______________________________________________
Openfiler-users mailing list
[email protected]
https://lists.openfiler.com/mailman/listinfo/openfiler-users
--
Andrew W. Kerber
'If at first you dont succeed, dont take up
skydiving.'
_______________________________________________
Openfiler-users mailing list
[email protected]
https://lists.openfiler.com/mailman/listinfo/openfiler-users
_______________________________________________
Openfiler-users mailing list
[email protected]
https://lists.openfiler.com/mailman/listinfo/openfiler-users
