I checked my systems and both seem to respond to ping. I believe these are using the images I downloaded from
http://www.openflow.org/wk/index.php/Pantou_:_OpenFlow_1.0_for_OpenWRT Also just double checked that I'm able to ssh into the box. I assume you're connected to the correct port, etc.... -Dan On Monday, March 21, 2011 at 4:32 PM, Victor Torres wrote: Thx for the reply. > > When i use the 1.0 image, it seems all normal, but it doesn't respond. > The indication LEDs works normal too. > > Any ideias? I don't think that is device problem. > > On 21 March 2011 12:34, Daniel E Talayco <[email protected]> wrote: > > I was able to load the latest tplink image without a problem (at least not > > any problem like this). I think I upgraded a linksys box as well. > > > > Are your boxes completely dead? > > > > -->) > > > > > > On Mar 21, 2011, at 8:16 AM, Victor Torres <[email protected]> wrote: > > > > > Hello, > > > > > > I was testing the img for Linksys wrt54g at > > > http://www.openflow.org/wk/index.php/Pantou_:_OpenFlow_1.0_for_OpenWRT > > > > > > In 2 devices and they dont respond after the tftp transfer. Interesting > > > that the 0.8.9 image works out of the box with the same method. > > > > > > Difference is that when the device reboots after transfer, 1.0 stops > > > responding to ping, etc... > > > > > > Anyone had similar problems? > > > > > > > > > Thx, > > > > > > Peace! > > > Victor T. > > > _______________________________________________ > > > openflow-discuss mailing list > > > [email protected] > > > https://mailman.stanford.edu/mailman/listinfo/openflow-discuss > _______________________________________________ openflow-discuss mailing list [email protected] https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
