Hi KK, I would use openflow-1.0. here is the output from git branch -a * master remotes/origin/devel/brandonh/nlfix remotes/origin/devel/grg/wireshark remotes/origin/devel/spec_diff remotes/origin/devel/tyabe/0.8.9-netfpga remotes/origin/devel/tyabe/1.0.0-netfpga remotes/origin/master remotes/origin/release/0.8.9 remotes/origin/release/0.9.0 remotes/origin/release/1.0.0 remotes/origin/spec1.1 Landy
--- On Mon, 7/11/11, kk yap <[email protected]> wrote: From: kk yap <[email protected]> Subject: Re: [openflow-discuss] keepalive_subagent not running properly To: "man monaco" <[email protected]> Date: Monday, July 11, 2011, 10:30 AM Which version of OpenFlow would you be using? Mind pasting you git branch -a? RegardsKK On 11 July 2011 10:27, man monaco <[email protected]> wrote: Hi KK, when i do git branch -a, i get a asterisk on master branch (*master). which version is the branch? The error message about wlan1 network down now is resolved, i was running ofdatapath & ofprotocol before hostapd which led to that error. Thank You,Landy --- On Mon, 7/11/11, kk yap <[email protected]> wrote: From: kk yap <[email protected]> Subject: Re: [openflow-discuss] keepalive_subagent not running properly To: "man monaco" <[email protected]> Cc: "OpenFlow-Discuss" <[email protected]> Date: Monday, July 11, 2011, 10:05 AM Two things to check. * Which version of OpenFlow reference switch are you running? * Is your network up? Seems like the error is saying your wlan1 is down. Regards KK On 11 July 2011 09:44, man monaco <[email protected]> wrote: Hi, I installed Openroads recently, everything seems to work as required but i have problem with (keepalive_subagent). It runs at the beginning when i reboot the AP and when a mobile node connects to AP, several SNMP traps/gets messages are sent received. After 1 minute or so, the keepalive_subagent terminates by itself. when i do : ps -eaf|grep subagentit shows only trap_subagent and wifi_subagent running only. i tried running it manually by executing /etc/snmp/keepalive_subagent -x /var/agentx/masterStill doesn't work. Also, i receive this error when keepalive_subagent is off and a mobile node connects to the AP: Dec 31 19:03:10|00003|netdev|WARN|error receiving Ethernet packet on Network is down: wlan1Dec 31 19:03:10|00004|datapath|ERR|error receiving data from wlan1: Network is down Any clue where am going wrong? ThanksLandy _______________________________________________ openflow-discuss mailing list [email protected] https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
_______________________________________________ openflow-discuss mailing list [email protected] https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
