Hi KK, When i run keepalive_subagent, i don't see neither error nor successful messages. The subagents (keepalive, trap, wifi) are loaded automatically when the AP reboots, i don't load them manually. Landy
--- On Mon, 7/11/11, kk yap <[email protected]> wrote: From: kk yap <[email protected]> Subject: Re: [openflow-discuss] keepalive_subagent not running properly To: "man monaco" <[email protected]> Cc: "OpenFlow-Discuss" <[email protected]> Date: Monday, July 11, 2011, 10:51 AM That should be fine. What is the error when you started the agent manually? You should not start the agent until OpenFlow is loaded, since you are mucking with the loading of stuff. RegardsKK On 11 July 2011 10:45, man monaco <[email protected]> wrote: Hi KK, I would use openflow-1.0. here is the output from git branch -a * master remotes/origin/devel/brandonh/nlfix remotes/origin/devel/grg/wireshark remotes/origin/devel/spec_diff remotes/origin/devel/tyabe/0.8.9-netfpga remotes/origin/devel/tyabe/1.0.0-netfpga remotes/origin/master remotes/origin/release/0.8.9 remotes/origin/release/0.9.0 remotes/origin/release/1.0.0 remotes/origin/spec1.1 Landy --- On Mon, 7/11/11, kk yap <[email protected]> wrote: From: kk yap <[email protected]> Subject: Re: [openflow-discuss] keepalive_subagent not running properly To: "man monaco" <[email protected]> Date: Monday, July 11, 2011, 10:30 AM Which version of OpenFlow would you be using? Mind pasting you git branch -a? RegardsKK On 11 July 2011 10:27, man monaco <[email protected]> wrote: Hi KK, when i do git branch -a, i get a asterisk on master branch (*master). which version is the branch? The error message about wlan1 network down now is resolved, i was running ofdatapath & ofprotocol before hostapd which led to that error. Thank You,Landy --- On Mon, 7/11/11, kk yap <[email protected]> wrote: From: kk yap <[email protected]> Subject: Re: [openflow-discuss] keepalive_subagent not running properly To: "man monaco" <[email protected]> Cc: "OpenFlow-Discuss" <[email protected]> Date: Monday, July 11, 2011, 10:05 AM Two things to check. * Which version of OpenFlow reference switch are you running? * Is your network up? Seems like the error is saying your wlan1 is down. Regards KK On 11 July 2011 09:44, man monaco <[email protected]> wrote: Hi, I installed Openroads recently, everything seems to work as required but i have problem with (keepalive_subagent). It runs at the beginning when i reboot the AP and when a mobile node connects to AP, several SNMP traps/gets messages are sent received. After 1 minute or so, the keepalive_subagent terminates by itself. when i do : ps -eaf|grep subagentit shows only trap_subagent and wifi_subagent running only. i tried running it manually by executing /etc/snmp/keepalive_subagent -x /var/agentx/masterStill doesn't work. Also, i receive this error when keepalive_subagent is off and a mobile node connects to the AP: Dec 31 19:03:10|00003|netdev|WARN|error receiving Ethernet packet on Network is down: wlan1Dec 31 19:03:10|00004|datapath|ERR|error receiving data from wlan1: Network is down Any clue where am going wrong? ThanksLandy _______________________________________________ openflow-discuss mailing list [email protected] https://mailman.stanford.edu/mailman/listinfo/openflow-discuss _______________________________________________ openflow-discuss mailing list [email protected] https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
_______________________________________________ openflow-discuss mailing list [email protected] https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
