Hi,
I'd like to configure an OpenFlow network in in-band mode. Which document
should I refre to? I used stanford's OpenFlow V1.0.And if the OpenFlow network
is configured in this mode how can each OFSwitch connect to the nox controller
and how does NOX controller communicate to each OFSwitch?Is there any mechanism
that allows OFSwitch to discover its neighbor OFSwitch? My OpenFlow network
topology looks like this.
clietnt1---OFSwtich2----OFSwitch1---OFSwitch3---client2
\ /
\ /
\ /
\ /
OFSwitch4
|
|
NOX Controller
client1 IP:192.168.1.1
client2 IP:192.168.1.2
NOX controller IP:192.168.1.10
The NIC of OFSwich4 connects to NOX controller IP:192.168.1.3
Other OFSwitches' NIC has no IP Address
2012-02-29
chenyangseamoon
_______________________________________________
openflow-discuss mailing list
openflow-discuss@lists.stanford.edu
https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
