In band control is a switch-specific feature and not supported by all (or even most) switches. What switch are you using?
- Rob . On Tue, Feb 28, 2012 at 6:19 PM, chenyangseamoon <chenyangseam...@163.com> wrote: > Hi, > I'd like to configure an OpenFlow network in in-band mode. Which document > should I refre to? I used stanford's OpenFlow V1.0.And if the OpenFlow > network is configured in this mode how can each OFSwitch connect to the nox > controller and how does NOX controller communicate to each OFSwitch?Is > there any mechanism that allows OFSwitch to discover its neighbor > OFSwitch? My OpenFlow network topology looks like this. > clietnt1---OFSwtich2----OFSwitch1---OFSwitch3---client2 > \ / > \ / > \ / > \ / > OFSwitch4 > | > | > NOX Controller > client1 IP:192.168.1.1 > client2 IP:192.168.1.2 > NOX controller IP:192.168.1.10 > The NIC of OFSwich4 connects to NOX controller IP:192.168.1.3 > Other OFSwitches' NIC has no IP Address > 2012-02-29 > ________________________________ > chenyangseamoon > > _______________________________________________ > openflow-discuss mailing list > openflow-discuss@lists.stanford.edu > https://mailman.stanford.edu/mailman/listinfo/openflow-discuss > _______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
