Hi Philip,

I am using the ofsoftswitch13.


On Fri, Jul 5, 2013 at 3:12 PM, Philip Wette <we...@mail.upb.de> wrote:

>  Hi,
>
> which switch are you using? i had the same problem earlier this week with
> the userspace implementation. There is already a workaround for that issue
> in the main branch of mininet. just update via git.
>
>
> Reagrds,
>
> Philip
>
> Am 05.07.13 08:34, schrieb Purnima Mohan:
>
>  Hi All,
>
> While using Mininet to setup link properties like 'BANDWIDTH' using TCIntf
> for a link between interfaces, I am facing some issues. Need to clarify the
> same. My topology is as shown below.
>
>  *Flows:*
> Host1 - Host4
>  Host2 - Host5
>  Host3 - Host6
>
>  I set each of the link capacity as 1Mbps using *"self.addLink(switch1,
> switch2, bw=1)"*
>
>  When I send traffic 'simultaneously' on all the 3 hosts using iperf,
> each flow shows Bandwidth of 1Mbps. Since the link bw between Switch1 and
> Switch2 is set as 1Mbps, I expected the sum of the bw of the 3 flows will
> give me 1Mbps. But I observe that each of the flow gives a bw of 1 Mbps
> making the sum to be 3Mbps, when I had set the link bw between Switch1 and
> 2 to be just 1Mbps.
>
>  Please clarify me on this regards, Thank you.
>
>  --
>  *Regards,*
> *Purnima*
>
>
>
> _______________________________________________
> openflow-discuss mailing 
> listopenflow-discuss@lists.stanford.eduhttps://mailman.stanford.edu/mailman/listinfo/openflow-discuss
>
>
>
> --
> Philip Wette, M.Sc.             E-Mail: we...@mail.upb.de
> University of Paderborn         Tel.:   05251 / 60-1716
> Department of Computer Science
> Computer Networks Group         http://wwwcs.upb.de/cs/ag-karl
> Warburger Straße 100            Room:   O3.152
> 33098 Paderborn
>
>
> _______________________________________________
> openflow-discuss mailing list
> openflow-discuss@lists.stanford.edu
> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
>
>


-- 
*Regards,*
*Purnima*
_______________________________________________
openflow-discuss mailing list
openflow-discuss@lists.stanford.edu
https://mailman.stanford.edu/mailman/listinfo/openflow-discuss

Reply via email to