I want to try the slicing operation. So I did not include the no-slicing option in my command.
I will update mininet and try. On Fri, Jul 5, 2013 at 3:18 PM, Philip Wette <we...@mail.upb.de> wrote: > Did you try invoking the switches with command line option " > no-slicing"? That at least worked for the 1.0 userspace implementation. > > Am 05.07.13 09:14, schrieb Purnima Mohan: > > Hi Philip, > > I am using the ofsoftswitch13. > > > On Fri, Jul 5, 2013 at 3:12 PM, Philip Wette <we...@mail.upb.de> wrote: > >> Hi, >> >> which switch are you using? i had the same problem earlier this week with >> the userspace implementation. There is already a workaround for that issue >> in the main branch of mininet. just update via git. >> >> >> Reagrds, >> >> Philip >> >> Am 05.07.13 08:34, schrieb Purnima Mohan: >> >> Hi All, >> >> While using Mininet to setup link properties like 'BANDWIDTH' using >> TCIntf for a link between interfaces, I am facing some issues. Need to >> clarify the same. My topology is as shown below. >> >> *Flows:* >> Host1 - Host4 >> Host2 - Host5 >> Host3 - Host6 >> >> I set each of the link capacity as 1Mbps using *"self.addLink(switch1, >> switch2, bw=1)"* >> >> When I send traffic 'simultaneously' on all the 3 hosts using iperf, >> each flow shows Bandwidth of 1Mbps. Since the link bw between Switch1 and >> Switch2 is set as 1Mbps, I expected the sum of the bw of the 3 flows will >> give me 1Mbps. But I observe that each of the flow gives a bw of 1 Mbps >> making the sum to be 3Mbps, when I had set the link bw between Switch1 and >> 2 to be just 1Mbps. >> >> Please clarify me on this regards, Thank you. >> >> -- >> *Regards,* >> *Purnima* >> >> >> >> _______________________________________________ >> openflow-discuss mailing >> listopenflow-discuss@lists.stanford.eduhttps://mailman.stanford.edu/mailman/listinfo/openflow-discuss >> >> >> >> -- >> Philip Wette, M.Sc. E-Mail: we...@mail.upb.de >> University of Paderborn Tel.: 05251 / 60-1716 >> Department of Computer Science >> Computer Networks Group http://wwwcs.upb.de/cs/ag-karl >> Warburger Straße 100 Room: O3.152 >> 33098 Paderborn >> >> >> _______________________________________________ >> openflow-discuss mailing list >> openflow-discuss@lists.stanford.edu >> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss >> >> > > > -- > *Regards,* > *Purnima* > > > > -- > Philip Wette, M.Sc. E-Mail: we...@mail.upb.de > University of Paderborn Tel.: 05251 / 60-1716 > Department of Computer Science > Computer Networks Group http://wwwcs.upb.de/cs/ag-karl > Warburger Straße 100 Room: O3.152 > 33098 Paderborn > > -- *Regards,* *Purnima*
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss