And how should i make changes to my configuration file to enable internet? my wan port is being used by the controller
On Sun, May 11, 2014 at 1:34 PM, Yiannis Yiakoumis <gyiakou...@gmail.com>wrote: > Hi, > > Please cc the mailing-list on follow-ups. > You can check the port either using wireshark or the controller (depending > on the controller you might have to print it yourself). In case you haven't > done this so far, I'd suggest to go through the Mininet OpenFlow tutorial : > http://mininet.org/ > > Yiannis > > > On Thu, May 8, 2014 at 2:19 AM, Namrah Tariq <10besenta...@seecs.edu.pk>wrote: > >> Hi Yiannis, >> Thank you for your suggestions. >> I wanted to know which message you are talking about. When I start >> openflow and it connects to the switch and then I connect two clients to my >> switch through wireless I saw a message on the controller saying installing >> flow from port 5 to 65528. Is this my wireless port? >> Sorry if i'm asking an annoying question, I'm new to all this stuff just >> started 2 weeks ago. >> >> >> On Thu, May 8, 2014 at 12:55 AM, Yiannis Yiakoumis >> <gyiakou...@gmail.com>wrote: >> >>> Hi Namrah, >>> >>> You should be able to figure out the wireless port by looking the >>> switch-configuration message during OF handshake, or looking at the port >>> field from packet-ins. >>> Also, do check that simple output action works before you setup and use >>> queues.. >>> >>> Yiannis >>> >>> >>> On Wed, May 7, 2014 at 6:50 AM, Namrah Tariq >>> <10besenta...@seecs.edu.pk>wrote: >>> >>>> I'm using pox with openflow 1.0 on my openwrt flashed router TL-WR740N >>>> v4.23. >>>> Basically I want to connect my controller to wan port of router and >>>> make queues on wireless port and forward traffic through these queues. My >>>> ofprotocol and ofdatapath services run and my controller also connects to >>>> the switch. My problem is that I don't know which port is the wireless port >>>> and when i connect clients to the switch wirelessly the wireless connection >>>> keeps disconnecting and i'm unable to ping one client from an other. Please >>>> help me. Here are my configs. >>>> I tried by making queues on port 5 but no traffic is passing through >>>> queues. My pox code is correct because I tested it on mininet. >>>> >>>> #/etc/config/network >>>> config interface 'loopback' >>>> option ifname 'lo' >>>> option proto 'static' >>>> option ipaddr '127.0.0.1' >>>> option netmask '255.0.0.0' >>>> >>>> config globals 'globals' >>>> option ula_prefix 'fdaa:d16f:ceae::/48' >>>> >>>> config switch >>>> option name 'switch0' >>>> option reset '1' >>>> option enable_vlan '1' >>>> option enable_learning '0' >>>> >>>> config switch_vlan >>>> option device 'switch0' >>>> option vlan '1' >>>> option ports '0t 1' >>>> option vid '1' >>>> >>>> config switch_vlan >>>> option device 'switch0' >>>> option vlan '3' >>>> option ports '0t 3' >>>> option vid '3' >>>> >>>> config switch_vlan >>>> option device 'switch0' >>>> option vlan '4' >>>> option ports '0t 4' >>>> option vid '4' >>>> >>>> config switch_vlan >>>> option device 'switch0' >>>> option vlan '2' >>>> option ports '0t 2' >>>> option vid '2' >>>> >>>> config switch_vlan >>>> option device 'switch0' >>>> option vlan '5' >>>> option ports '0t 5' >>>> option vid '5' >>>> >>>> config interface 'lan1' >>>> option ifname 'eth0.1' >>>> option proto 'static' >>>> >>>> config interface 'lan2' >>>> option ifname 'eth0.2' >>>> option proto 'static' >>>> >>>> config interface 'lan3' >>>> option ifname 'eth0.3' >>>> option proto 'static' >>>> >>>> config interface 'lan4' >>>> option ifname 'eth0.4' >>>> option proto 'static' >>>> >>>> config interface >>>> option ifname 'wlan0' >>>> option proto 'static' >>>> >>>> config interface 'wan' >>>> option ifname 'eth1' >>>> option _orig_ifname 'eth1' >>>> option _orig_bridge 'false' >>>> option proto 'static' >>>> option ipaddr '192.168.1.12' >>>> option netmask '255.255.255.0' >>>> option gateway '192.168.1.1' >>>> option broadcast '192.168.1.255' >>>> option dns '192.168.1.1' >>>> >>>> #/etc/config/openflow >>>> >>>> config 'ofswitch' >>>> option 'dp' 'dp0' >>>> option 'dpid' '000000000001' >>>> option 'ofports' 'eth0.1 eth0.2 eth0.3 eth0.4 wlan0' >>>> option 'ofctl' 'tcp:192.168.1.10:6633' >>>> option 'mode' 'outofband' >>>> >>>> #/etc/config/wireless >>>> >>>> config wifi-device radio0 >>>> option type mac80211 >>>> option channel 11 >>>> option hwmode 11ng >>>> option path 'platform/ar933x_wmac' >>>> list ht_capab SHORT-GI-20 >>>> list ht_capab SHORT-GI-40 >>>> list ht_capab RX-STBC1 >>>> list ht_capab DSSS_CCK-40 >>>> option htmode HT20 >>>> # REMOVE THIS LINE TO ENABLE WIFI: >>>> #option disabled 1 >>>> >>>> config wifi-iface >>>> option device radio0 >>>> #option network lan >>>> option mode ap >>>> option ssid OpenWrt >>>> option encryption none >>>> >>>> -- >>>> Namrah Tariq >>>> BESE-1 >>>> SEECS-NUST >>>> >>>> _______________________________________________ >>>> openflow-discuss mailing list >>>> openflow-discuss@lists.stanford.edu >>>> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss >>>> >>>> >>> >>> >>> -- >>> Yiannis . >>> >> >> >> >> -- >> Namrah Tariq >> BESE-1 >> SEECS-NUST >> > > > > -- > Yiannis . > -- Namrah Tariq BESE-1 SEECS-NUST
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
