I managed to create queues on the wireless port (i.e. 2)
I'm using the lan port as the management port and wan and wlan0 for
openflow ports. Here are my new configurations:
*/etc/config/network*
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fd00:5739:f251::/48'
config interface 'lan'
option ifname 'eth0'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option dns '8.8.8.8'
config interface 'wan'
option ifname 'eth1'
option proto 'static'
config interface
option ifname 'wlan0'
option proto 'static'
config interface 'wan6'
option ifname '@wan'
option proto 'dhcpv6'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '0 1 2 3 4'
*/etc/config/wireless*
config wifi-device radio0
option type mac80211
option channel 6
option hwmode 11g
option path 'platform/ar933x_wmac'
option htmode HT20
# REMOVE THIS LINE TO ENABLE WIFI:
#option disabled 1
config wifi-iface
option device radio0
#option network lan
option mode ap
option ssid OpenWrt
option encryption none
*/etc/config/openflow*
config 'ofswitch'
option 'dp' 'dp0'
option 'dpid' '000000000001'
option 'ofports' 'eth1 wlan0'
option 'ofctl' 'tcp:192.168.1.10:6633'
option 'mode' 'outofband'
Everything upto the point where i install flows on the switch on port2 and
packets enqueue to the required queues is working...the only problem i have
is that when they reach the queue they are not forwarded to the Internet.
What am I missing?? please help
On Sun, May 11, 2014 at 6:24 PM, Namrah Tariq <10besenta...@seecs.edu.pk>wrote:
> And how should i make changes to my configuration file to enable internet?
> my wan port is being used by the controller
>
>
> On Sun, May 11, 2014 at 1:34 PM, Yiannis Yiakoumis
> <gyiakou...@gmail.com>wrote:
>
>> Hi,
>>
>> Please cc the mailing-list on follow-ups.
>> You can check the port either using wireshark or the controller
>> (depending on the controller you might have to print it yourself). In case
>> you haven't done this so far, I'd suggest to go through the Mininet
>> OpenFlow tutorial : http://mininet.org/
>>
>> Yiannis
>>
>>
>> On Thu, May 8, 2014 at 2:19 AM, Namrah Tariq
>> <10besenta...@seecs.edu.pk>wrote:
>>
>>> Hi Yiannis,
>>> Thank you for your suggestions.
>>> I wanted to know which message you are talking about. When I start
>>> openflow and it connects to the switch and then I connect two clients to my
>>> switch through wireless I saw a message on the controller saying installing
>>> flow from port 5 to 65528. Is this my wireless port?
>>> Sorry if i'm asking an annoying question, I'm new to all this stuff just
>>> started 2 weeks ago.
>>>
>>>
>>> On Thu, May 8, 2014 at 12:55 AM, Yiannis Yiakoumis <gyiakou...@gmail.com
>>> > wrote:
>>>
>>>> Hi Namrah,
>>>>
>>>> You should be able to figure out the wireless port by looking the
>>>> switch-configuration message during OF handshake, or looking at the port
>>>> field from packet-ins.
>>>> Also, do check that simple output action works before you setup and use
>>>> queues..
>>>>
>>>> Yiannis
>>>>
>>>>
>>>> On Wed, May 7, 2014 at 6:50 AM, Namrah Tariq <10besenta...@seecs.edu.pk
>>>> > wrote:
>>>>
>>>>> I'm using pox with openflow 1.0 on my openwrt flashed router TL-WR740N
>>>>> v4.23.
>>>>> Basically I want to connect my controller to wan port of router and
>>>>> make queues on wireless port and forward traffic through these queues. My
>>>>> ofprotocol and ofdatapath services run and my controller also connects to
>>>>> the switch. My problem is that I don't know which port is the wireless
>>>>> port
>>>>> and when i connect clients to the switch wirelessly the wireless
>>>>> connection
>>>>> keeps disconnecting and i'm unable to ping one client from an other.
>>>>> Please
>>>>> help me. Here are my configs.
>>>>> I tried by making queues on port 5 but no traffic is passing through
>>>>> queues. My pox code is correct because I tested it on mininet.
>>>>>
>>>>> #/etc/config/network
>>>>> config interface 'loopback'
>>>>> option ifname 'lo'
>>>>> option proto 'static'
>>>>> option ipaddr '127.0.0.1'
>>>>> option netmask '255.0.0.0'
>>>>>
>>>>> config globals 'globals'
>>>>> option ula_prefix 'fdaa:d16f:ceae::/48'
>>>>>
>>>>> config switch
>>>>> option name 'switch0'
>>>>> option reset '1'
>>>>> option enable_vlan '1'
>>>>> option enable_learning '0'
>>>>>
>>>>> config switch_vlan
>>>>> option device 'switch0'
>>>>> option vlan '1'
>>>>> option ports '0t 1'
>>>>> option vid '1'
>>>>>
>>>>> config switch_vlan
>>>>> option device 'switch0'
>>>>> option vlan '3'
>>>>> option ports '0t 3'
>>>>> option vid '3'
>>>>>
>>>>> config switch_vlan
>>>>> option device 'switch0'
>>>>> option vlan '4'
>>>>> option ports '0t 4'
>>>>> option vid '4'
>>>>>
>>>>> config switch_vlan
>>>>> option device 'switch0'
>>>>> option vlan '2'
>>>>> option ports '0t 2'
>>>>> option vid '2'
>>>>>
>>>>> config switch_vlan
>>>>> option device 'switch0'
>>>>> option vlan '5'
>>>>> option ports '0t 5'
>>>>> option vid '5'
>>>>>
>>>>> config interface 'lan1'
>>>>> option ifname 'eth0.1'
>>>>> option proto 'static'
>>>>>
>>>>> config interface 'lan2'
>>>>> option ifname 'eth0.2'
>>>>> option proto 'static'
>>>>>
>>>>> config interface 'lan3'
>>>>> option ifname 'eth0.3'
>>>>> option proto 'static'
>>>>>
>>>>> config interface 'lan4'
>>>>> option ifname 'eth0.4'
>>>>> option proto 'static'
>>>>>
>>>>> config interface
>>>>> option ifname 'wlan0'
>>>>> option proto 'static'
>>>>>
>>>>> config interface 'wan'
>>>>> option ifname 'eth1'
>>>>> option _orig_ifname 'eth1'
>>>>> option _orig_bridge 'false'
>>>>> option proto 'static'
>>>>> option ipaddr '192.168.1.12'
>>>>> option netmask '255.255.255.0'
>>>>> option gateway '192.168.1.1'
>>>>> option broadcast '192.168.1.255'
>>>>> option dns '192.168.1.1'
>>>>>
>>>>> #/etc/config/openflow
>>>>>
>>>>> config 'ofswitch'
>>>>> option 'dp' 'dp0'
>>>>> option 'dpid' '000000000001'
>>>>> option 'ofports' 'eth0.1 eth0.2 eth0.3 eth0.4 wlan0'
>>>>> option 'ofctl' 'tcp:192.168.1.10:6633'
>>>>> option 'mode' 'outofband'
>>>>>
>>>>> #/etc/config/wireless
>>>>>
>>>>> config wifi-device radio0
>>>>> option type mac80211
>>>>> option channel 11
>>>>> option hwmode 11ng
>>>>> option path 'platform/ar933x_wmac'
>>>>> list ht_capab SHORT-GI-20
>>>>> list ht_capab SHORT-GI-40
>>>>> list ht_capab RX-STBC1
>>>>> list ht_capab DSSS_CCK-40
>>>>> option htmode HT20
>>>>> # REMOVE THIS LINE TO ENABLE WIFI:
>>>>> #option disabled 1
>>>>>
>>>>> config wifi-iface
>>>>> option device radio0
>>>>> #option network lan
>>>>> option mode ap
>>>>> option ssid OpenWrt
>>>>> option encryption none
>>>>>
>>>>> --
>>>>> Namrah Tariq
>>>>> BESE-1
>>>>> SEECS-NUST
>>>>>
>>>>> _______________________________________________
>>>>> openflow-discuss mailing list
>>>>> openflow-discuss@lists.stanford.edu
>>>>> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Yiannis .
>>>>
>>>
>>>
>>>
>>> --
>>> Namrah Tariq
>>> BESE-1
>>> SEECS-NUST
>>>
>>
>>
>>
>> --
>> Yiannis .
>>
>
>
>
> --
> Namrah Tariq
> BESE-1
> SEECS-NUST
>
--
Namrah Tariq
BESE-1
SEECS-NUST
_______________________________________________
openflow-discuss mailing list
openflow-discuss@lists.stanford.edu
https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
