Hmm, that is weird, because it should work. Can you set org.opendaylight.openflowplugin.impl to DEBUG in karaf and send logs?
________________________________ Od: yann bourdeau <[email protected]> Odoslané: utorok, 11. apríla 2017 20:15 Komu: Tomáš Slušný Kópia: Anil Vishnoi; [email protected]; Arun Paneri (NoviFlow); [email protected] Predmet: Re: [openflowplugin-dev] Problem moving flow (FLOWMOD with experimenter action) from config datastore to operational stores (continued) Hi Tomas, I tried with a match field (empty or not), it does not work. Here is my body of my REST request: <?xml version="1.0" encoding="UTF-8" standalone="no"?> <flow xmlns="urn:opendaylight:flow:inventory"> <barrier>false</barrier> <cookie>10</cookie> <cookie_mask>10</cookie_mask> <flags>SEND_FLOW_REM</flags> <flow-name>FooXf1</flow-name> <hard-timeout>0</hard-timeout> <id>1234</id> <idle-timeout>0</idle-timeout> <installHw>false</installHw> <match> <ipv4-destination>10.0.10.2/24</ipv4-destination> </match> <instructions> <instruction> <apply-actions> <action> <order>0</order> <nfx-action-set-payload-ip xmlns="urn:opendaylight:openflowplugin:extension:noviflow:action"> <payload_size>1</payload_size> <payload_offset>0</payload_offset> <hasmask>0</hasmask> <data>9</data> </nfx-action-set-payload-ip> </action> </apply-actions> <order>0</order> </instruction> </instructions> <priority>2</priority> <strict>false</strict> <table_id>2</table_id> </flow> Here is the flow in the configuration store (via a GET request): { "flow-node-inventory:table": [ { "id": 2, "flow": [ { "id": "1234", "hard-timeout": 0, "idle-timeout": 0, "match": { "ipv4-destination": "10.0.10.2/24" }, "flags": "SEND_FLOW_REM", "instructions": { "instruction": [ { "order": 0, "apply-actions": { "action": [ { "order": 0, "openflowplugin-extension-noviflow-action:nfx-action-set-payload-ip": { "payload_offset": 0, "data": [ 9 ], "payload_size": 1, "hasmask": 0 } } ] } } ] }, "priority": 2, "table_id": 2, "cookie_mask": 10, "cookie": 10, "installHw": false, "barrier": false, "strict": false, "flow-name": "FooXf1" } ] } ] } I have run Wireshark and I don't see any flow mod request. Do you have any idea where I should be looking in the code for the problem? Thanks a lot, Le 11 avr. 2017 a 11:55, Tomáš Slušný <[email protected]<mailto:[email protected]>> a écrit : Hi yann, this was caused probably because you have <match/> missing. After moving to single layer serialization, I forgot to handle this case (what was working with old serialization method), so can you try to push your flow with empty match? And also, I created patch that should resolve this issue here: https://git.opendaylight.org/gerrit/#/c/54789/1 Regards, Tomas ________________________________ Od: yann bourdeau <[email protected]<mailto:[email protected]>> Odoslané: 11. apríla 2017 17:24 Komu: Anil Vishnoi Kópia: [email protected]<mailto:[email protected]>; Arun Paneri (NoviFlow); [email protected]<mailto:[email protected]> Predmet: Re: [openflowplugin-dev] Problem moving flow (FLOWMOD with experimenter action) from config datastore to operational stores (continued) Hi Anil, Here is the trace. As you can see, there is no flow created. Yann Bourdeau, M.Ing. Senior Software Developer 438-499-4607 [email protected]<mailto:[email protected]>
_______________________________________________ openflowplugin-dev mailing list [email protected] https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev
