Josh,

that was no typo:
It can happen that one of the policies earlier in the chain rewrites a
destination into something that needs to be resolved by calling the
internal policy again.

Regards,
Jan

-- 
Jan Willamowius, Founder of the GNU Gatekeeper Project
EMail  : j...@willamowius.de
Website: http://www.gnugk.org
Support: http://www.willamowius.com/gnugk-support.html


Josh Rogalski wrote:
> This worked flawlessly, as always a huge thank you.  Slowly but surely my 
> config is coming together into a very workable gatekeeper.  One thing I did 
> do was removed the additional "internal".  I was assuming it was a typo being 
> in there twice.  Thank you again everyone!  
> 
> -----Original Message-----
> From: Jan Willamowius [mailto:j...@willamowius.de] 
> Sent: Wednesday, October 01, 2014 12:26 PM
> To: openh323gk-users@lists.sourceforge.net
> Subject: Re: [Openh323gk-users] Dialing question
> 
> Just delete it. No need to say the same thing twice.
> 
> Jan
> 
> Josh Rogalski wrote:
> > Thank you Jan, should I remove the top line I have " 
> > h323_ID=ldap,dns,explicit,internal" or should I modify that one as well 
> > with the information you stated below?  
> > 
> > -----Original Message-----
> > From: Jan Willamowius [mailto:j...@willamowius.de]
> > Sent: Wednesday, October 01, 2014 11:38 AM
> > To: openh323gk-users@lists.sourceforge.net
> > Subject: Re: [Openh323gk-users] Dialing question
> > 
> > Hi Josh,
> > 
> > I would suggest you use this:
> > 
> > [RoutingPolicy]
> > default=explicit,ldap,internal,srv,dns,internal,parent,neighbor
> > 
> > With that configuration you'll be able to dial by alias or IP.
> > 
> > Regards,
> > Jan
> > 
> > --
> > Jan Willamowius, Founder of the GNU Gatekeeper Project EMail  : 
> > j...@willamowius.de
> > Website: http://www.gnugk.org
> > Support: http://www.willamowius.com/gnugk-support.html
> > 
> > 
> > Josh Rogalski wrote:
> > > Thank you Simon, I haven't tried this yet, but I will.  My current config 
> > > looks like this:
> > > 
> > > [RoutingPolicy]
> > > h323_ID=ldap,dns,internal
> > > default=ldap,dns,internal
> > > 
> > > 
> > > Would I then change it to:
> > > 
> > > [RoutingPolicy]
> > > h323_ID=ldap,dns,explicit,internal
> > > default=ldap,dns,explicit,internal
> > > 
> > > 
> > > If I do this, will I be able to dial both alisas and IP Address depending 
> > > on whichever I feel like dialing?  Do I understand this correctly?
> > > From: Simon Horne [mailto:s.ho...@packetizer.com]
> > > Sent: Wednesday, October 01, 2014 4:39 AM
> > > To: 'GNU Gatekeeper Users'
> > > Subject: Re: [Openh323gk-users] Dialing question
> > > 
> > > Josh
> > > 
> > > Use the explicit routing policy
> > > http://www.gnugk.org/gnugk-manual-6.html
> > > 
> > > And add the following to the INI
> > > [RoutingPolicy]
> > > default=explicit,internal, ...
> > > 
> > > Simon
> > > 
> > > 
> > > From: Josh Rogalski [mailto:rogals...@cayuga-cc.edu]
> > > Sent: Wednesday, October 01, 2014 6:41 AM
> > > To: 
> > > openh323gk-users@lists.sourceforge.net<mailto:openh323gk-users@lists
> > > .sourceforge.net>
> > > Subject: [Openh323gk-users] Dialing question
> > > 
> > > I have a successfully running gnugk server acting as a gatekeeper for 
> > > h323 video conference calls.  One of the quirks I find is that when I 
> > > configure it on a video client endpoint, I can ONLY call to h323 alias's, 
> > > and no longer can I call directly to IP addresses.  Is there a way to use 
> > > the gatekeeper on a video endpoint, and use either the username OR the ip 
> > > address for dialing?  I can provide my config if necessary.
> > > 
> > > [Josh Signature January 2012]

------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________________

Posting: mailto:Openh323gk-users@lists.sourceforge.net
Archive: 
http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/

Reply via email to