Lars - As far as I know each file that is installed as part of an RPM has to have its own entry in the rpm spec file that was used to build the RPM. openhpi.conf is already spoken for - so you cannot overwrite or replace that file - when the new simulator rpm is installed.
If you need to install simulation.data in /etc/openhpi - then you will have to have a line describing this action somewhere in the spec file that is used to generate your rpm file for the new simulator. I would suggest looking at some of the other plugins and see how they handle individual files, and try to emulate that in your rpm spec file for the new simulator. Also, if the new simulator requires changes to openhpi.conf in order for the simulator to work - then the standard way of doing this is to have a commented-out stanza in the openhpi.conf file. Then later, a user could modify (i.e., uncomment your stanza) openhpi.conf so that the new simulator plugin is activated when OpenHPI is restarted. Hope this helps, --michael Regards, Michael Bishop Enterprise Servers and Storage (ISB Linux/Telco) Hewlett-Packard Company 3404 E. Harmony Rd. Bldg. 5L, Post B7, Mailstop 42 Fort Collins, CO 80528-9599 Phone: 970-898-4393 E-Mail: [email protected] > -----Original Message----- > From: Lars Wetzel [mailto:[email protected]] > Sent: Monday, May 10, 2010 2:22 PM > To: [email protected] > Cc: Bishop, Michael (ISB Linux/Telco) > Subject: Re: [Openhpi-devel] new simulator - cannot build RPMs > > > Hi Michael, > > sorry, I didn't run make rpm in the past. > There were two issues with openhpi.spec.in. I repair it. > > But there is still an open issue: > > Checking for unpackaged > file(s): /usr/lib/rpm/check-files > /home/goofy/workspace/openhpi-newsimulator/rpm/INSTALL > error: Installed (but unpackaged) file(s) found: > /etc/openhpi/simulation.data > > Maybe someone can give me a hint. > I thought the simulation file will be handled as > openhpi.conf, but it looks > like I miss something. > > Regards > Lars > > > > On Monday, 10. May 2010 18:21, Bishop, Michael (ISB > Linux/Telco) wrote: > > Lars - > > > > I attempted to build the new simulator branch today - but > ran into issues > > when I built the OpenHPI rpms. > > > > Attached is a log of the "make rpms" output. > > > > I normally, and would rather, test using rpms, as I can > better control the > > installation and removal of specific OpenHPI features. > > > > Please let me know if this is something you can fix right away. > > > > Regards, > > Michael Bishop > > Enterprise Servers and Storage (ISB Linux/Telco) > > Hewlett-Packard Company > > 3404 E. Harmony Rd. Bldg. 5L, Post B7, Mailstop 42 > > Fort Collins, CO 80528-9599 > > Phone: 970-898-4393 > > E-Mail: [email protected] > > -- > ------------------------------- > Dipl. Wi.ing. > Lars Wetzel > Uttinger Str. 13 > 86938 Schondorf a. Ammersee > > Tel.: 0179-2096845 > Mail: [email protected] > > USt-IdNr.: DE181396006 > ------------------------------------------------------------------------------ _______________________________________________ Openhpi-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openhpi-devel
