Hello, I'm trying to get hot swap working for our telecom AMC card. If the board is installed when the blade (MPCBL0050) comes up, I get hot-swap events when I pull out or push in the extractor (our AMC board is installed in the blades slot). That scenario seems to work fine. However, if the board is not installed at power up no events are delivered, and I see this in the log;
2010.12.01 10:15:37.971 event: RecordId = 54; 2010.12.01 10:15:37.971 RecordType = SystemEvent; 2010.12.01 10:15:37.971 Timestamp = 0x4cf66696; 2010.12.01 10:15:37.971 SlaveAddr = 0x92; 2010.12.01 10:15:37.971 Channel = 0; 2010.12.01 10:15:37.971 Lun = 0; 2010.12.01 10:15:37.971 Revision = 4; 2010.12.01 10:15:37.971 SensorType = AtcaHotswap; 2010.12.01 10:15:37.971 SensorNum = 0x8c; 2010.12.01 10:15:37.971 EventDirection = Assertion; 2010.12.01 10:15:37.971 EventReadingType = SensorSpecific; 2010.12.01 10:15:37.972 EventData1 = 0xa4; 2010.12.01 10:15:37.972 EventData2 = 0x03; 2010.12.01 10:15:37.972 EventData3 = 0x02; 2010.12.01 10:15:37.972 hot swap event at MC 0x92, sensor 140,FRU 2,M3 -> M4. 2010.12.01 10:15:37.972 WARNING: sensor NOT resource hot swap sensor, discard event It would seem like hot adding a board would be a normal hot-swap scenario. Anybody able to help? I am using OpenIPMI 2.0.16-7 and OpenHPI 2.14.0-5 on CentOS 5.5 x86_64. Thanks, Rich ============================================ Rich Tuttle Ulticom, Inc. [email protected] ============================================ ------------------------------------------------------------------------------ Increase Visibility of Your 3D Game App & Earn a Chance To Win $500! Tap into the largest installed PC base & get more eyes on your game by optimizing for Intel(R) Graphics Technology. Get started today with the Intel(R) Software Partner Program. Five $500 cash prizes are up for grabs. http://p.sf.net/sfu/intelisp-dev2dev _______________________________________________ Openhpi-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openhpi-devel
